Results 1 to 2 of 2
12-31-2010, 08:32 PM #1
- Join Date
- Dec 2010
92 sierra low beams do not work high beams do??
Hi i have a 1992 stepside z71 4x4 with 350, just got the truck its old and a little beat up and started fixing things, now Im down to the headlights and the low beams dont work, but the high beams do. i checked the bulbs first with an ohm meter and then hooked up 12v and they work out of the truck, so its not the bulb. today i bought a new headlight switch and changed it out, still no low beams. im looking for a wiring diagram or someone to tell me where there is either the relay for the low beams or a fuse or what ever ideas you may have.
thanks for any sugestions you can give.....
JimJim - MO
(in the past)
1976 Blazer (454,3/4 ton, 39.5x16.5 swampers) had it 23years stolen 3years ago :grrrrrr:
1985 Reg cab 4x4 (350,1/2 ton)
1986 Blazer (350,1/2 ton)
1992 Sonoma (4.3 non-vortec 2wd)
1992 Step-side Sierra Z71 (355,4x4,1/2 ton)
2007 Dodge Ram Big Horn (4.7 flex fuel,2wd,1/2 ton)
01-02-2011, 01:31 AM #2
Your probly missing a ground somewhere, Check to see if your getting power when on low and if you are its the ground.
1995 Chevy Silverado
Best Engine In The World!!!!!
Once i had a nearly dead battery and was only able to get 1 slow crank per attempt, Once to the fifth crank she fired up! (True Story)
Do you have a Tahoe,Yukon or a suburban? Join My Group
By dsfloyd in forum How-to GuidesReplies: 39Last Post: 01-25-2013, 08:20 PM
By MightyMax in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 10-12-2010, 10:29 AM
By airforcefun in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 03-01-2009, 09:28 PM
By phoebeisis in forum Chevy Truck AccessoriesReplies: 2Last Post: 05-06-2008, 02:41 PM
By ejamin73 in forum GM Electrical TechReplies: 3Last Post: 11-26-2007, 01:15 PM
Tags for this Thread