Results 1 to 3 of 3
01-12-2011, 06:39 PM #1
New to the forum and I just picked up a 96 GMC K1500 Suburban!
Hey everyone. Nice to meet y'all. I just bought a 96 GMC Suburban K1500 4x4 with 200,000 miles on it. It runs great and the 4x4 operates flawlessly. I changed the engine oil, transfer case and tranny fluid and it all looks clean. It already has new ball joints and driveline universals. All it needs is shocks and tires and of course a major cleaning inside and out. I picked it up for $2500 and I figure that I'll put at least that into it for the interior and the aforementioned shocks and tires. I pulled the valve covers and see some sludge. What would be the best way to clean this up without pulling the heads? I'll post some before and after pics when I get everything squared away. Thanks!!
01-12-2011, 07:15 PM #2
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Welcome to the club. It sounds like you got a good deal on your Burb. Most of the members here recommend Seafoam for all types of engine cleaning. Be sure & follow directions carefully & change your oil filter with every treatment.1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
01-18-2011, 10:34 AM #3
Once you have a big burb, nothing else will seem BIG enough
I have a 95 w 220,000 and it runs awesome - just took a 1800 mile round trip journey to New England over Christmas, fully loaded for less than the price of 1 plane ticketburbn' in NC
By DeadHead in forum GM PowertrainReplies: 16Last Post: 02-04-2011, 08:57 AM
By DigDirt in forum Member IntroductionsReplies: 8Last Post: 01-02-2011, 01:30 PM
By FergusonT in forum Lifted & Offroad SuspensionReplies: 27Last Post: 09-03-2010, 11:13 PM
By beard in forum GM PowertrainReplies: 2Last Post: 03-09-2009, 08:52 PM
By TheAngryHungarian in forum GM PowertrainReplies: 3Last Post: 10-25-2007, 10:02 PM
Tags for this Thread