GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default remove engine mounts/ raising engine help

    Hey guys, I need a little help with removing my engine mounts and raising my engine the easiest way possible... I'm trying to remove my oil pan to replace the gasket and oil pump... I'm aware that the easiest way is to remove the engine mount bolts and to raise the front of the engine, but my problem is, I don't have an engine jack, nor do I have a very good jack to jack the engine up from the bottom... I need to be able to get the oil pan and oil pump out as soon as possible... please help guys, any good sugestions will be noted and much appreciated... thanks again!

  2. #2

    Default

    I don't know about pushing it from under, but I certianly had to take the motor mount bolts out and lift the motor up to remove the oil pan from my 93 4WD Suburban. Maybe you can rent a engine lift? Or buy one, if you work on motors, you'll need it agian in the future anyways.

Similar Threads

  1. Plastic fender flares... to Remove or not to remove
    By Big_Ben in forum Chevy Truck Accessories
    Replies: 17
    Last: 02-10-2013, 10:18 PM
  2. Raising front end.
    By DSpivey in forum Lifted & Offroad Suspension
    Replies: 3
    Last: 05-26-2010, 10:47 AM
  3. 72 Chev truck engine mounts
    By 72Chevy in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 05-07-2010, 01:48 PM
  4. Replies: 0
    Last: 09-29-2009, 02:46 PM
  5. Ward's AutoWorld honors Flint Engine South 3.6-liter V-6 engine - MLive.com
    By ChevyFan in forum Chevy Traverse Forum (GMC Acadia, Buick Enclave)
    Replies: 0
    Last: 01-16-2008, 12:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •