Results 1 to 1 of 1
01-22-2011, 10:25 PM #1
- Join Date
- Dec 2010
- Augusta, GA
High mileage engine, replace rod bearings before knock?
Hey guys, I have a chevy 350 crate that has been abused terribly. I just had the heads rebuilt and am replacing the cam, lifters, timing chain, springs, oil pump and all new gaskets. Since ive got all that taken care of, should i replace the rod bearings now, or wait till the motor starts to knock? In a few days or possibly tomorrow, I am going to be raising the engine to get the oil pan out and I was wondering if it should be done since i am going ahead and getting the oil pan off... Ive already spent WAY more than i expected and i figured spending another 20 dollars on new rod bearings wouldnt be much of a gamble... but im curious to know if its safe to replace them on a high mileage engine... the cam i got is brand new so it will have to be broken in at 2000 rmp for 20 mins. Let me know what you guys think i should do!! I really dont want to have to sink more money into this engine anymore because i am BROKE! help me out guys, THANKS!
By shotgunner in forum Maintenance & UpkeepReplies: 19Last: 11-07-2011, 05:42 AM
By lynx in forum General Chevy & GM Tech QuestionsReplies: 3Last: 09-05-2010, 03:03 PM
By shotgunner in forum General Chevy & GM Tech QuestionsReplies: 15Last: 02-22-2010, 11:26 AM
By Pizzot in forum General Chevy & GM Tech QuestionsReplies: 2Last: 11-30-2009, 06:04 PM
By treefarmer in forum GM PowertrainReplies: 2Last: 01-27-2008, 03:45 PM
Tags for this Thread