GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Looking For Online Reference Tools

    I spent yesterday replacing the Turn Signal Switch on my mom's 95 Buick Regal. It was supposed to take about 4 hours if I had experieance working on cars. I found a tutorial on how to do it online and loaded it onto my smart phone. Took me two and a half hours using the instructions and pictures this guy had posted. By now your probably wondering what my point / question is I'm sure. After using this very useful tutorial it got me wondering, does anyone out there have similar tutorials online for any of the massive repairs that are required to completely rebuild a 95 Chevy Silverado extended cab 4x4 from the frame up? When I start stripping the body away from the truck this spring I'm going to be "going in blindly" and just figuring it out as I go. I thought if someone else on here has done this they might have found or made a tutorial for the more complicated parts (like removing the cab and everything in it) and would be able to tell me where I could find it. I'm going to keep searching and if I find something I'll be sure to share it with the rest of the group, but if anyone could point me in the right direction it would be greatly appreciated. Thanks everyone. Have a great week.

  2. #2
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,606
    Blog Entries
    1

    Default

    I don't think you'll find one tutorial that covers everything because body & frame disassembly & restoration, will be separate from mechanical, drive train, wiring, plumbing, fuel etc...
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  3. #3

    Default

    I'm not really looking for one tutorial to do it all. I'm more interested in finding a place that has multiple tutorials for the harder parts of dis assembly. I probably should have been a little clearer. :o)

  4. #4
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,606
    Blog Entries
    1

    Default

    OK if individual tutorials will be suitable, there are quite a few of them on here in the "how to" section. I don't remember seeing ones for internal engine, internal trans, r&i cab, or doing a complete wiring harness, or a frame rotiserie restoration, but there are ones covering most everything else, from r&i bed, fuel tank, pump, trans, engine etc. There's a wealth of knowledge in that section
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


Similar Threads

  1. jack tools
    By longrange223 in forum General Chevy & GM Tech Questions
    Replies: 8
    Last Post: 12-10-2010, 08:02 PM
  2. Cross reference for an engine...
    By gd2227 in forum GM Powertrain
    Replies: 0
    Last Post: 09-09-2009, 03:56 PM
  3. Jack tools
    By whatzleft in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 6
    Last Post: 08-09-2009, 10:09 AM
  4. Looking for Part Number Reference Info
    By Dezzmo in forum General Chevy & GM Tech Questions
    Replies: 9
    Last Post: 03-09-2009, 05:41 PM
  5. Replies: 3
    Last Post: 09-10-2008, 06:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •