Results 1 to 7 of 7
01-25-2011, 07:08 PM #1
Two 12" Kicker CVX 12" 2-ohm subs on a Hifonics HFi2500D?
The amp says mono, but there are two speaker outputs, how would I wire both of there DVC 2-ohm subs to the amp so that they're at a 2-ohm load from the amp? I just want to make sure that I can push the 1700 watts to them and not have to wire them to 4-ohms or something before I order everything. Thanks!
01-25-2011, 07:37 PM #204 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
01-25-2011, 07:46 PM #3
Alright, I figured it out. I hope that I just have to bridge it.
01-26-2011, 04:05 PM #4
01-26-2011, 06:56 PM #5
I will! They're going to be in a box that will extend from my dash to my back seat. I ordered everything last night, so I'll have everything hooked up in about a week.
01-28-2011, 11:18 PM #6
01-29-2011, 12:45 AM #7
I took out my middle jumper seat about a year ago, so I have plenty of room in between my driver and passenger seats, haha. The box is actually about 6" shy of extending from my dash to my back seat. When I build my box later on, it'll take up quite a bit of room, though. Right now I have a pre-fab ported box with 1.7 cubes per chamber. I would like to get at least 2 cubes per chamber, if not more and make those lows really come out.
By chevymanlobo in forum Audio, Video & Gadget TechReplies: 2Last: 06-17-2010, 09:34 AM
By DSpivey in forum Audio, Video & Gadget TechReplies: 12Last: 05-31-2010, 08:27 PM
By ChevyFarmKid in forum General ClassifiedsReplies: 0Last: 10-24-2009, 04:31 PM
By ChevyFan in forum Other GM CarsReplies: 0Last: 06-21-2008, 12:30 PM
By Cableguy in forum The Coffee Shop ~ Chit ChatReplies: 0Last: 04-27-2007, 10:47 PM
Tags for this Thread