Results 1 to 3 of 3
01-31-2011, 12:32 PM #1
- Join Date
- Jun 2010
Oil pressure guage bouncing all over
My oil pressure guage is normally pegged to the top reading 80 but has recently been bouncing from 0 to 80. None of the other guages seem to be doing anything out of the ordinary. Thanks in advance.
02-03-2011, 08:50 PM #2
- Join Date
- Feb 2011
- Marlton NJ
the stepper motor that operates the gauge is bad. common problem on these vehicles. There is information on the web, and if you are handy with a soldering iron, you can get the motors cheap on ebay an replace them yourself.
02-03-2011, 09:33 PM #3
Ok, I'll ask it....did you check the oil level?
By cyberpine in forum Chevy C/K Truck ForumReplies: 7Last Post: 10-22-2009, 07:25 AM
By crane557 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 04-28-2009, 10:09 PM
By iceman68 in forum Audio, Video & Gadget TechReplies: 21Last Post: 04-03-2009, 12:03 AM
By bassalive in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 11-28-2008, 10:56 PM
By SilveradoBrett in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 11-10-2008, 10:43 AM