Results 1 to 4 of 4
Thread: New Member, Need some help!
02-10-2011, 11:12 AM #1
- Join Date
- Feb 2011
New Member, Need some help!
I need some help, I got some new tires since old ones were done. Im flat broke and need an alignment, its gonna have to wait. But I can visually see my camber is off. I know the adjustment is the cams on the upper control arms. But I need to know which is camber and which is caster...I just need to get the camber roughly dialed in to avoid ruining my new kumhos. Thanks! and advice is greatly appreciated.
tires are 285/75/16 the cams/bolts on the upper arms are all about in the middle, wondering if this is correct. Thanks!
Last edited by azchevy; 02-10-2011 at 12:17 PM.
By hall1836 in forum Member IntroductionsReplies: 8Last Post: 06-05-2010, 03:36 PM
By johnski in forum Member IntroductionsReplies: 5Last Post: 05-16-2010, 08:32 PM
By DamnBigPapa in forum Member IntroductionsReplies: 21Last Post: 07-01-2009, 07:32 PM
By larrymass in forum Member IntroductionsReplies: 7Last Post: 05-07-2009, 06:24 AM
By rs6er in forum Member IntroductionsReplies: 9Last Post: 04-27-2009, 09:11 AM