GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Measuring ATF after Vette Servo

    im planning on doing the vette servo this weekend and i was wondering how to measure the correct amount of fluid to put back in after the mod.

    which ATF is recommended? dexron IV or VI? i am unsure of what kind of ATF is in it now because it was changed when i bought it used

  2. #2
    stephan's Avatar
    Join Date
    Sep 2010
    Far West, Oregon USA,
    Blog Entries


    I don't think putting the Vette servo is going to change the amount of fluid your tranny requires so I would just replace the approximate amount you drain out & then check with the normal procedure. If you want to get it down to the gnats azz, measure exactly how much you drain out & put that much back in & then double check when you get it warmed up. I don't know which type Dextron your trans takes because you didn't list the year or transmission.
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol

  3. #3


    2000 1500 silverado and i think i have the 4l60e

  4. #4


    As far as i know GM recommends putting dex VI in all now, check with your local dealer i know we have been doing dex VI in most trucks from 2000 and up, when ever the customer wants to pay for the additive

    2003 Z71 Silverado LS
    Access roll up cover
    Bed Rails
    Billet Grill insert
    Bed Rug
    CB with PA system
    Waiting to be installed
    Two 8in RF HX2 punch( would have 12s but they got stolen)

Similar Threads

  1. Corvette Servo
    By bzboardco in forum GM Powertrain
    Replies: 7
    Last: 10-16-2010, 06:53 AM
  2. 1973 Chevy Corvette L48 Coupe - Me & My Vette - Vette Magazine
    By ChevyFan in forum Chevy Corvette Forum
    Replies: 0
    Last: 04-27-2010, 07:00 PM
  3. 1968 Chevy Corvette Coupes - Me & My Vette - Vette Magazine
    By ChevyFan in forum Chevy Corvette Forum
    Replies: 0
    Last: 03-19-2010, 11:50 PM
  4. Vette servo
    By heavy chevy in forum Performance & Fuel
    Replies: 1
    Last: 03-12-2009, 08:11 AM
  5. Measuring Horsepower
    By KD7ONE in forum The Coffee Shop ~ Chit Chat
    Replies: 1
    Last: 06-08-2007, 07:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts