Results 1 to 2 of 2
Thread: 3.42 Gearing in Suburban
05-13-2007, 02:40 PM #1
3.42 Gearing in Suburban
Anyone have 3.42 gears in a '03 to '05 Suburban 1500 with the 5.3 engine? What kind of MPG are You obtaining on the highway? Does it pull well?
I have 3.73's but was thinking seriously about a change. The only factory gears available at this moment are the 3.73 and 3.42's. Otherwise, I would go to 3.23 for the mile per gallon factor.
Aftermarket gears are reputed to make too much noise with the Eaton LSD pumpkin; at least that's what the rear end specialist told Me. I'm either going to have to increase the miles per gallon on this truck, or it's gotta go. Hate to lose it, as it's a sweetheart to drive, and so comfortable on trips.
Thanks in advance for Your input!"I Hate When That Happens!"
06-26-2007, 09:13 PM #2
- Join Date
- Jun 2007
- S.W. MI
Stick with the 3:73 gears and look at other alternatives. I'm running 3:73 gears in my 5.3 crew cab and I get 16-17 mpg back and forth to work (In town) and get 19-22 on the hwy depending on quality of fuel and which way the wind is blowing. I had a v-10 excursion and 8-9 to work and 11-13 on the hwy.
By bacol14 in forum Lifted & Offroad SuspensionReplies: 6Last Post: 06-18-2010, 03:35 PM
By deepstuff in forum GM PowertrainReplies: 1Last Post: 04-24-2010, 02:36 PM
By Truck in forum GM PowertrainReplies: 0Last Post: 04-14-2010, 09:47 PM
By 91k2500 in forum Lifted & Offroad SuspensionReplies: 2Last Post: 11-16-2009, 07:49 PM
By 07 redrado in forum Lifted & Offroad SuspensionReplies: 3Last Post: 02-06-2008, 08:02 PM
Tags for this Thread