Results 1 to 3 of 3
Thread: help. 6.0 p0300
03-07-2011, 09:15 PM #1
- Join Date
- Mar 2011
help. 6.0 p0300
hey i have a 2500hd with the 6.0 and i am getting a p0300 and p0200 code. i have put new wires and new coils on as well as tested all the fuel injectors and they all pulse and drop 20 psi when pulsed. any ideas would be great thanks
03-08-2011, 01:09 AM #2
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Did you also replace the spark plugs to try & cover your P0300 code? What type of plugs do you have in it?
For your p0200 code did you circumvent the controll to pulse the injectors? How did you check them1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
03-08-2011, 05:44 AM #3
Definitely new plugs. AC Delco gapped at .040".
Have you cleaned the MAF? Are you running a K&N?When you hear hoofbeats, look for horses not zebras.
By dshewy14 in forum General Chevy & GM Tech QuestionsReplies: 8Last: 04-13-2010, 12:02 PM
By cable734 in forum GM PowertrainReplies: 5Last: 03-05-2010, 12:51 AM
By vncj96 in forum General Chevy & GM Tech QuestionsReplies: 12Last: 06-18-2009, 04:51 PM
By sociald in forum General Chevy & GM Tech QuestionsReplies: 3Last: 01-17-2009, 05:07 AM
By msm1889 in forum General Chevy & GM Tech QuestionsReplies: 1Last: 04-10-2008, 07:52 PM
Tags for this Thread