Results 11 to 13 of 13
08-26-2011, 10:06 PM #11
- Join Date
- Aug 2011
- Tuttle, OK
Sorry if I am bringing up an old thread, but i found this forum to be very helpful and wanted to put in my two cents about how I did mine. I have a 2008 Silverado. On the back bowtie, along with the flexfuel emblem and LT emblem, I heated them up with a hair dryer and then used fishing line and ran it back and forth under the emblems. It removes it without ever risking scratching the paint. Hope this helps.
05-08-2013, 04:00 PM #12
get a thin piece of wire/cable and "saw" it back and fourth as you pull it across the back of the emblem to cut through the double sided tape.
like how you'd remove windshield rubberGas was $1.83 when Obama took office.....
11-19-2013, 07:13 PM #13
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
Wonder how many people do this mod.
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
Support GMTC: Help the site, contribute today
By Darknesss23 in forum Chevy Truck AccessoriesReplies: 21Last Post: 01-01-2012, 02:59 PM
By Mikeskeetxskeet in forum General ClassifiedsReplies: 0Last Post: 03-16-2010, 07:19 AM
By 05blackedout2wd in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 12-30-2009, 03:56 AM
By Duncan_Z71 in forum Chevy Truck AccessoriesReplies: 3Last Post: 05-05-2009, 10:53 PM
By jerrynino in forum Chevy Truck AccessoriesReplies: 2Last Post: 08-18-2008, 02:35 PM
Tags for this Thread