Results 1 to 2 of 2
03-10-2011, 05:52 PM #1
- Join Date
- Feb 2010
Grille Removal - GMT900 GMC Sierra
I have a 2009 2500HD GMC Sierra and need some help removing the grille. Last time I did it, I was able to get it partially out, but the bumper cover/fascia trim panel that wraps the top of the bumper is attached and I couldn't see how to release it.
I need to remove the grille to drill a couple holes and install rivnuts on the diagonal radiator cross brace on the passenger side to install a Whelen SA315P Siren Speaker and the SAK24 mount. In order to do this, it will require full grille removal to accomplish this task.
Attached is a pic of where the holes need to be drilled and the rivnuts installed.
Pics or detailed instructions from the service manual would be appreciated.
Thank you in advance!2013 Chevrolet Silverado 2500HD Z71/LTZ Crew Cab Duramax 6.6L HD / Allison 1000
03-11-2011, 08:00 PM #2
I did a little searching around the fourms for you and came across this post and the guy seemed to be having the same issue. http://www.gmtruckclub.com/forum/sho...009-GMC-Sierra
and this custom grill site has a walkthru. http://www.8-lug.com/tech/1103_8l_gm...all/index.html
Hopefully those can help
Pics of my truck can be found here: http://goo.gl/0AYwB
By MinnSub in forum Chevy C/K Truck ForumReplies: 12Last: 12-02-2012, 12:40 AM
By sstoner911 in forum Chevy Truck AccessoriesReplies: 0Last: 01-25-2011, 11:05 PM
By AllBlkdOut07 in forum General ClassifiedsReplies: 6Last: 04-30-2010, 03:47 AM
By ARCTICFRONTIER in forum General Chevy & GM Tech QuestionsReplies: 2Last: 01-28-2010, 01:48 PM
By sstoner911 in forum General Chevy & GM Tech QuestionsReplies: 0Last: 06-24-2009, 11:19 AM
Tags for this Thread