Results 1 to 7 of 7
03-12-2011, 04:41 PM #1
05 Silverado 1500 Factory Wheel/Tire size?
Hey guys, anyone happen to know what the factory wheel and tire size on a 2005 Silverado 1500 LT?
---------- Post added at 04:41 PM ---------- Previous post was at 03:12 PM ----------
Ok, scratch that, the truck has P265/70R17 on it. So... tirerack.com says 285/70 will fit on the 17x7.5 rim. Can anybody confirm this?Tater -- South Dakota
1999 K1500 5.7L -- "Willy"
-THIS TRUCK IS NOW DEAD THANKS TO A DRUNK DRIVER!
2005 1500 Silverado 5.3L-- "Herbie"
-100% Stock (for now)
03-12-2011, 04:55 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
yes they will.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
03-14-2011, 05:58 PM #3
So do you think they would be alright on my stock 05 Silverado until I can get my body lift ordered and put on it? too wide and will rub? Thanks for the much appreciated advice
03-14-2011, 09:34 PM #4
Yes they will rub. You can just put a leveling kit on and they won't rub.
03-19-2011, 10:47 PM #5
I have 285/70/17 toyos on a bone stock 2005 crew cab z71 I put on last week, no rubbing at all and I didn't touch the bars at all.. I was more surprised since mine seems lower then most.... Instantly noticed trans shift points are off a bit and the truck is slower going from lightweight passenger rated bridgestone h/t's to the d rated toyo a/t's too new to notice gas issues yet, but a reprogram might be in the near future... I haven't had it on the highway yet to see how bad it is... But rides a ton better nowhere the amount of floating feeling while driving....
03-21-2011, 12:46 AM #6
Good to know chew, that makes me feel better. A buddy of mine took four moto rims, 20", off his truck after he bought it and put different ones on so he would sell them to me for like 250-300 bucks. Now I have to decide if I can afford the lift at this point! hahaha what a problem to have
03-28-2011, 08:07 AM #7
just to let you know the truck seems to shift fine now, Don't know if the computer needed time to adjust or if I just got used to it, but all is fine now.....
By jwco5.3 in forum Wheels & TiresReplies: 0Last: 01-31-2011, 03:02 PM
By lewisb13 in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 10-10-2010, 02:56 PM
By kwalls22 in forum Wheels & TiresReplies: 0Last: 05-05-2010, 11:24 AM
By Superior Firepower in forum Wheels & TiresReplies: 3Last: 10-07-2009, 02:24 PM
By nmn207 in forum Chevy C/K Truck ForumReplies: 0Last: 07-21-2009, 06:15 AM
Tags for this Thread