Results 1 to 4 of 4
Thread: Smittybil Nerf Steps PLEASE HELP
03-15-2011, 02:47 PM #1
Smittybil Nerf Steps PLEASE HELP
I have a 2010 black crew cab Z71 and it has just a 2" leveling kit on it but i have 33s and 20" rims...my question is i just ordered and installed the smittybilt nerf steps.. the ones with the smaller bar that sits close to the cab and has the little step that comes out...i can not decide if i like them or not. does anyone have these and what is everybody elses opinion on them? i will upload a pic as soon as it stops raing enough for me to take one. they just seem to not sit quite close enough to the cab in my opinion....
J. Roy2010 Silverado Z71 4x433/12.50/R20 Cooper Discover STT Tires20" KMC XD MonstersRough Country 2" Leveling KitRancho ShocksAiraid TBSVolant CAI8000K HID Head Lights6000K HID Fog LightsTinted Head Lights/Fog Lights and Brake LightsBlacked Out Completely
03-15-2011, 03:58 PM #2
This may sound like a stupid question, but were you wanting them for a step or for protection of your rocker panels? If the latter, I think they make bars that are specifically for guarding your rocker panels. They sit snug right up near the body. If the former, do you mean the actual step hangs too low, or the whole thing overall? It seems like it should hang down somewhat or it would defeat the purpose of having a step. I don't have the same kind as you, but mine don't hang any lower than the frame of the truck.-Sal
2008 Silverado 1500 LT 5.3L Crew Cab
Desert Brown Metallic
Century top, Yakima roof rack, 2.5" front lift, Readylift 3" rear blocks, Line-x bedliner, step bars, AVS vent visors, Weathertech floor liners, door sill guards, power tailgate lock, tailgate damper, KC light bar w/ PIAA 525s, rear mini-light bar, rear LED reverse/utility lights, dual batteries (Cole Hersee isolator), DIC upgrade, 20" GM wheels, Cooper Discoverer A/T3s, 26 gal. onboard air (twin Viair 480Cs), Nathan Airchime K3HA / Old cast 2nd Gen. P3 Horns, Graham White valve, bell
Past Chevys: 1985 S-10 ext.cab, 1963 BelAir sedan
03-15-2011, 04:10 PM #3
no thats not a dumb question but yes i wanted them as a step. but since you brought it up i was actually hoping they would fit like the rock sliders that protect your rockers and have a step that extends off of them.
here is a link to the ones i ordered and they do not fit as close to my truck as they appear to fit to the titan in the picture with them.
03-15-2011, 04:24 PM #4
Just a thought...I'm not sure how the frame is on the Titan, but I can tell you this: I have a 1500 and my dad has a 2500HD. We basically have the same steps (Westin-style round tubes), but his appear to hang lower from the rocker panels than mine do. It's probably only a 1/2" to 3/4" difference, but noticeable. The frame on his truck (HD) is taller than the standard 1/2 ton frame, and there probably is a difference in the distance from the 'mounting cups' to the bottom of the rocker panel (I haven't actually measured it).
With this in mind, I'm sure there is a difference in that same measurement between a Titan and a Silverado/Sierra. It may sit more snug on the Titan. In the meantime you can google your steps and silverado and search the images to see if others look the same as yours.
By bbwalker665 in forum Chevy Truck AccessoriesReplies: 4Last Post: 11-26-2009, 12:37 PM
By MRFASTPHIL in forum Chevy Truck AccessoriesReplies: 7Last Post: 11-10-2009, 07:48 AM
By gatormike69 in forum Chevy Truck AccessoriesReplies: 11Last Post: 07-22-2009, 04:23 AM
By dsrtne1 in forum Chevy Truck AccessoriesReplies: 12Last Post: 07-14-2009, 06:19 PM
By ChevyTech in forum Chevy Truck AccessoriesReplies: 3Last Post: 07-25-2007, 10:36 AM