Results 1 to 9 of 9
Thread: 2002 avalanch stuck in 4 hi
03-19-2011, 12:29 PM #1
2002 avalanch stuck in 4 hi
A friend of mine back home is having trouble with her truck.its an 02 Avalanche with push button 4wd. Im still deployed so Im tryin to help her from here so she wont be lied to at a shop or anything.
The truck is stuck in 4hi. she has tried to get it into 2wd and 4lo but nothing... She said she can hear somthing under the truck (Im assuming the transfer case) attempting to disengage the 4wd but it never actually does it..so Ive ruled out the possibility of bad switches..any other ideas?
2004 Silverado 4x4
1986 K5 Blazer
8" Superlift w/39.5 super swampers
1992 GMC Jimmy "Blue Bomber"
03-20-2011, 10:43 AM #2
03-20-2011, 10:46 AM #3
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Tell her to check the relays or fuse under the hood. Or it could be something bigger under the truck..08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
03-20-2011, 11:53 AM #4
Does she have the "Service 4WD" message? Most likely the encoder/motor. Push button 4x4 uses a motor to shift the transfer case in place of a shift lever. It also has a position sensor to tell it where it is, 2hi, 4hi or 4lo, Sometimes it's just the sensor, which can be replaced by itself or it's the motor itself. If it's the motor I believe it comes with the sensor as a whole assembly. She's probably going to have the codes read to determine if it's the motor or just the sensor. I just replaced mine a couple of months ago, mine was just the sensor but I had them replace the whole thing.Adam
03-21-2011, 12:42 PM #5
as far as i know shes not getting the famous "Service 4wd" message.but I'll ask her.thanks for the help guys.I'll bring these up to her and see if we can get this thing figured out.It'd be alot easier if i could see it myself haha
Adam, that sounds like the most likely problem to me..from the way shes describing it to me, it seems like the motor is attempting to shift out of 4hi but just cant pull it off..would you happen to know what the technical term for the motor is?
03-24-2011, 12:02 PM #6
I'm pretty sure G.M. refers to it as the transfer case encoder motor.
03-24-2011, 12:48 PM #7David
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2002 Nissan Altima (My Commuter)
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
03-24-2011, 01:32 PM #8
alright thanks guys. shes gonna go ahead and send it to the shop. but like i said i just didnt want anybody trying to take advantage of her and want to replace everything in the world to charge her some outrageous amount
03-24-2011, 01:51 PM #9
By tontruck2 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 06-12-2010, 12:37 AM
By gecko094pat in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 01-11-2010, 11:54 AM
By Tiny1987 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 06-30-2009, 05:25 PM
By Flywhip in forum GM PowertrainReplies: 3Last Post: 11-12-2008, 11:14 PM
By DirtDog in forum Photo & Video GalleryReplies: 18Last Post: 02-17-2008, 05:06 PM