GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 12
  1. #1
    Jr. Apprentice
    Join Date
    Mar 2011
    Location
    Birmingham, AL
    Posts
    11

    Default Newbie from Bama

    Hey new to working on my own vehicle but because of the economy and the recent mishaps with my vehicles I have decided to try my hand at being a mechanic! Kind of in a weird spot now but I'm working my way to getting both my trucks fixed. I was driving a 2002 trailblazer but the engine started running rough so I did a compression check and cylinder 2 (which was misfiring according to the ECM) was 100 psi lower than the other 5 cylinders. About a week before this happened I had bought a 96 gmc sierra which didnt run and I've been working on that ever since. I bought the GMC for 500 and put another 700 into it and am hoping to have my babies running by Summer.

    Just wanted to post here and Say HELLO!
    I still have HOPE not giving up yet
    1996 GMC Sierra LS 4.3L V6 VIN:W

  2. #2

    Default

    Welcome to the G M T C !


    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    ===============
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  3. #3
    Legend
    murdog94's Avatar
    Join Date
    Feb 2008
    Location
    Cloquet, Minnesota, United States
    Posts
    8,198
    Blog Entries
    12

    Default

    Welcome aboard!
    Mike

    Currently

    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

  4. #4
    Legend Bigbomber's Avatar
    Join Date
    Feb 2010
    Location
    Winnipeg,Manitoba,Canada
    Posts
    5,089

    Default

    Welcome to the site!
    [/SIGPIC]2009 Chevy Silverado LT 1500 EXT CAB 4X4 Vortec 4.8L SFI,K&N air filter,Weathertech Floor Liners ,Weathertech Stone/Bug Deflector, Line X Spray On Bedliner, TruXport Rollup Tonneau Cover, Molded Mudguards, Viper 5701 LE 2 way Security Alarm/Remote Starter, Xm Satelite Radio,BILSTEIN 5100 rear shocks,BILSTEIN 5100 front levelling shocks,READYLIFT 2" rear lift blocks,Goodyear Wrangler Territorys -265/70R 17"

  5. #5
    Sr. Engineer IPFK83's Avatar
    Join Date
    Jan 2011
    Location
    Jacksonville, North Carolina, United States
    Posts
    318

    Default

    Welcome to the club.

    ======​SOLD=====
    2006 1500 4x4 extended cab short bed
    SAS 12" suspension lift
    38x15.50 Mickey Thompson ATZ
    20x10 Mickey Thompson Classic II
    FOA custom shocks
    Dana 44HD front axle
    14 Bolt SF w/ detroit locker
    yukon 5.13 gears
    Dynatech Long tube headers
    Dynatech y pipe w/ high flow cats
    Magnaflow muffler
    Tom woods custom dual cv rear driveshaft
    K&N AIRAID system
    Hypertech power programmer
    And much more...........

  6. #6

    Default

    Welcome to the club, from lower Alabama.

  7. #7
    Legend


    mfleetwood's Avatar
    Join Date
    Jul 2010
    Location
    Denver, CO
    Posts
    7,213
    Blog Entries
    1

    Default

    Welcome to the Club!!!


    Mike (Denver, CO) - 2008 Sierra 1500 Z71 SLE 5.3L 4WD

    SUSPENSION: Rancho 4" Suspension Lift; Rancho RS9000XL Shocks; Rancho Skid Plates; Rancho MyRide Wireless Shock Controller;
    TIRES:
    BFG All Terrain KO 315/70/17
    DRIVE TRAIN: 4.56 Gears; Detroit TrueTrac Differential; True Cool 40k Transmission Cooler
    PERFORMANCE: DiableSport Predator Tuner; Custom Tuned by Diablew; Magnaflow Exhaust; AFE Cold Air Intake
    ELECTRONICS: Kenwood DNX6180 Touchscreen; Subthump box w/10" Kicker; Driver Information Center (DIC); Rear View Camera
    ACCESSORIES: Westin Brush/Grill Gaurd; Westin Nerf Bars; Truxedo Tonneau; 20% Tint; Tow Mirrors w/Heat & Signals

  8. #8

    Default

    Welcome to the club!

    Bobby - North Carolina
    2008 4x4 5.3L V8
    6" Suspension Lift and 1.5" Body Lift
    20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
    4:56 Yukon Gears
    Hypertech Speedometer Calibrator
    Baja style bed mount spare tire carrier
    Flowmaster 40 series dual exhaust
    Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
    N-Fab Nerf Steps
    K&N CAI
    No Fear Pedals
    Tint, Line-X bedliner, Window visors, Rear wheel well liners
    Painted front grill, bow ties and door badges, de-"lettered" tailgate
    Powder coated front and rear bumpers

  9. #9

  10. #10
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    Welcome to the club
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. Happy Birthday bama dave
    By ChevyFan in forum Member Introductions
    Replies: 5
    Last: 05-13-2010, 10:38 PM
  2. Hey, newbie here
    By Bamm in forum Member Introductions
    Replies: 7
    Last: 01-23-2010, 12:29 PM
  3. Newbie from UK
    By kandave in forum Member Introductions
    Replies: 9
    Last: 10-19-2009, 01:45 PM
  4. Newbie
    By agreene603 in forum Member Introductions
    Replies: 6
    Last: 10-05-2009, 09:00 PM
  5. new guy from bama
    By Jordan in forum Member Introductions
    Replies: 10
    Last: 05-25-2008, 03:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •