GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default 1995 gmc shift cable

    I have a 1995 gmc sierra and I have recently replaced the shift cable on it and now it is really hard to move the shift lever on the steering column. You can move it but you have to use two hands and u can not move it back up the column at all. I have tried to adjust the cable but may not be doing to correctly. Any help would be appreciated.

  2. #2
    Jr. Apprentice SkullMountainRider's Avatar
    Join Date
    Mar 2011
    Location
    British Columbia, Canada
    Posts
    28

    Default

    Is this a new cable? It could be faulty, (binding). Is it routed properly? (Twisted?)

  3. #3
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    Is it possible that you had the shifter in park & the trans in low when you adjusted & tightened down your adjustment? Having to use two hands to move the shifter indicates something wrong with your adjustment or ??? If the shifter & the trans were at opposite ends of the spectrum when you tightened it down then all you're doing is stretching the cable when you're trying to force the shifter. Best thing to do is disconnect it at one end & see if it moves easily. If it does make sure your trans detent is indexed at park as well as your shifter & go again.
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  4. #4

    Default

    Yea the cable is new and as far as i can see its not twisted anywhere and the trans and lever are both in park. When I disconnect the cable from the trans arm the lever moves freely. and i can shift it it is just very hard to do so, so i thought i had it adjusted at a weird angle or something. So i have no idea where to go from there.

Similar Threads

  1. 1995 K2500 4wd low will not shift out of second gear
    By bobm396 in forum GM Powertrain
    Replies: 4
    Last: 11-23-2010, 07:01 AM
  2. Trans shift cable
    By thrasher in forum GM Powertrain
    Replies: 0
    Last: 02-26-2010, 09:35 PM
  3. 1996 k1500 4l60e shift cable
    By 1996z71 in forum Chevy C/K Truck Forum
    Replies: 5
    Last: 08-18-2009, 09:27 PM
  4. H2 shift cable problems
    By MyakkaJeff in forum Hummer Forum
    Replies: 0
    Last: 06-09-2009, 06:00 PM
  5. Aligning Shift Cable on 4L80E
    By Crawdaddy in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last: 04-25-2008, 10:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •