GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Default Fuel Mileage with Intake, Exhaust, Programmer

    yesterday, i decided to take the Diablosport Trinity i have out of my Camaro, have the Camaro dyno tuned, and use the programmer in my Silverado. average fuel mileage was 17.0 mpg mix of city/highway. at 70 mph i was getting about 19-20 mpg on flat road. after i installed the 87 octane tune on my programmer, i took it out for some testing. i was getting 22 mpg at 70 mph!

    i ordered a K&N 63 Series intake; almost went with the Volant powercore, but i read on here and elsewhere the volant box doesn't seal too well and the K&N had great IAT, MAP, & HP numbers according to Jennabear's intake thread. i wanted a sealed box with a polyethylene tube because we get really hot summers here, i do a lot of highway driving, and it is also very dusty. also ordered Corsa DB Series cat-back exhaust, single side exit. i decided on the Corsa because of their "reflective sound technology" with zero drone while cruising and big sound when you stomp on the gas. i've had Flowmaster and Magnaflow on vehicles before and didn't like the cabin noise they created. i got the intake for $284 and the exhaust for $517 with free 2 day shipping from Amazon.com. not to bad considering the intake was $600 and headers/exhaust was $2000 on my camaro!

    my main question is:
    for those of you that have a similar combo (intake, cat-back exhaust, programmer with 87 octane tune) what kind of fuel mileage are you getting mixed city/highway, and also how much just on the highway?

    i also ordered the steering wheel w/ audio controls, Universal Home Remote roof panel, and Katzkin leather in ebony w/ dove tail grey perforated inserts and grey stitching. i'll post a new thread once i'm done with each thing!

  2. #2

    Default

    Sounds like your rockin and rollin along with this truck! I can't help you with the mileage info but I can say I' pretty happy with my diablo sport as well!

    2006 Duramax LBZ
    Edge Evo
    4'' Diamond eye to 6'' tip
    16'' ion alloy, 33'' fierce attitudes
    Lots of work left to do!

  3. #3

    Default

    What motor do you have?
    1998 K1500 Ext. Cab 4.3 5spd
    Amsoil, CIA

    2007 Harley Davidson Vrod
    Amsoil, Vance & Hines 2into1, K&N Topless,
    Screamin Eagle Racetuner, StageII cams,
    Carbon fiber front fender, and a few more lil goodies:wink:

  4. #4

    Default

    Quote Originally Posted by ntbush83 View Post
    Sounds like your rockin and rollin along with this truck! I can't help you with the mileage info but I can say I' pretty happy with my diablo sport as well!
    yeah, i've done a lot to it since getting it in august. i didn't realize how stripped down it was until i started searching the web on how to make it my own! so far i've added fog lamps, DIC panel, oval step sides, dual wall exhaust tip which i will use with the corsa exhaust, chrome locking tailgate handle (texas edition package comes with chrome door handles, mirror caps, and 20" chrome wheels), debadged, and white bowties! i think after the audio controls, UHR panel, intake, and exhaust comes in, my wife is cutting me off for awhile!!! :D

    Quote Originally Posted by Blacksheep1 View Post
    What motor do you have?
    5.3L with the 6 speed transmission and 3.08 gears
    Last edited by 2010TexasEdition; 04-04-2011 at 11:48 AM.

  5. #5

    Default

    Sounds like a sweet ride
    1998 K1500 Ext. Cab 4.3 5spd
    Amsoil, CIA

    2007 Harley Davidson Vrod
    Amsoil, Vance & Hines 2into1, K&N Topless,
    Screamin Eagle Racetuner, StageII cams,
    Carbon fiber front fender, and a few more lil goodies:wink:

Similar Threads

  1. Got an intake now looking for exhaust/programmer
    By GSXR in forum Performance & Fuel
    Replies: 2
    Last Post: 03-08-2011, 07:57 PM
  2. Best Programmer, intake and exhaust for 08 Silverado?
    By texasleo77 in forum Performance & Fuel
    Replies: 2
    Last Post: 04-30-2010, 02:55 PM
  3. Programmer/Intake questions
    By HawaiiKid in forum Performance & Fuel
    Replies: 13
    Last Post: 03-02-2010, 10:54 PM
  4. Hypertech Programmer and K&N Intake FS
    By blackbighorn05 in forum General Classifieds
    Replies: 5
    Last Post: 11-09-2009, 01:41 AM
  5. Programmer or Intake?
    By Chevyman224 in forum Performance & Fuel
    Replies: 15
    Last Post: 07-21-2009, 10:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •