Results 1 to 8 of 8
Thread: 2002 5.3 plug gap?
04-04-2011, 03:14 PM #1
- Join Date
- Mar 2011
2002 5.3 plug gap?
I have heard i am supposed to set them at .060, and another tells me .040?
04-04-2011, 03:21 PM #2
Your 2002" Came with A/C Delco Platinum Plugs which were Gaped at....0.60.....The A/C Delco Plugs that G.M./Chevy Is now installing are the A/C Delco iridium Tip Spark Plugs which are Gaped at....0.40.....the A/C Delco Iridium Plugs are the ones you want to go with,
Also the A/C Delco Plugs are already Gaped right out of the Box....Check the Gap to make sure there Gaped at ...0.40, But Do Not Attempt to Re-Gap them, as the Tips can be Easily Damaged....
Edit:.....Now would be a Good Time to check your Plug Wires and replace if needed.
Last edited by 99'HEARTBEAT; 12-09-2013 at 09:44 AM. Reason: Added Infor.
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
06-02-2011, 10:43 AM #3
Great info HeartBeat,
Just FYI to ratrodder, normally the spark gap and alot of other maintenance related things are listed in a chart in your owner manual.
2009 Silverado 1500
5.3L / 3.73 G80 / 4spd / 4x4 / LWB/ Ext Cab / HD Tow-Haul
2.25in ReadyLift Level Kit / 3in blocks/ 3500lb HellWig / 265x65x17 Wrangler AT
K&N Filter / AirRaid MIT / MagnaFlow 2.25" Dual Exhaust / HyperTech MaxEnergy
06-06-2011, 01:26 PM #4
the reason why some say .40 gap is because then they will burn better. shorter gap causes a stronger shark hence burn the fuel more efficiently. heres the down side, they will burn out faster. the .60 gap is for max life span of the plug with still burning enough fuel for proper operation. imo if i had a hotter coil i would get to about .50, if using a stock coil then around .35-.40. here again this makes alot of difference as what to gap to depending on any and all engine mods that you have done to include exhaust work. if everything is bone stock performance wise( this does not include k&n and a chip and then your have a hot rod like so many think) then i would stick to around .55-.60. if your exhaust is opened up(meaning no cats or punched cats) and/or head work done then start looking at a lower gap.
imo, i would only use autolite plugs. my t-bird is pushing about 15.1psi boost at a flow rate of around 800cfm on a 3.8 v6 with 60lbs injectors tune to 42lbs at a 40% cycle rate and 26degree timing curve and never skips a beat.94 sub 6inch lift 34inch bfg mt. massive rework project soon. the audio system hit 150.3db so now its time to rebuild and try for 155db. mudpuppy is also getting a new engine, rebuilt ifs, dual 500amp 15.1vdc alts, 5 5,000amp batts, ant the combined wattage with the new system should be close to 15,000watts. this is going to be a wild ride boy and girls.
06-06-2011, 01:52 PM #5
The reason for the .040 gap is more reliable firing, and longer lifespan on the rest of the ignition system.
AC Delco (or NGK) plugs only for me.When you hear hoofbeats, look for horses not zebras.
06-06-2011, 02:27 PM #6
Welcome to the club, ratrodder.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
06-08-2011, 04:03 PM #7
Here's a little gift for you all. Please "bookmark" it and you'll have it to use when you need it.
http://sm.gpona.com:9001/si/home.doThe Cheap-*ss Modder & Thread Killer
The Realist says, "The glass is too big".
2013 GMC Sierra 1500 SLT Z60 4WD Crew Cab
Mineral Green Metallic w/ Tan Leather Interior
5.3 L FLEX w/AFM, 6A, Cheap-*ss Mods
32 Dump Club Member
Range V8 AFM Eliminator
06-08-2011, 05:10 PM #8
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Thanks Blue, that's a keeper1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
By billsf100 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 4Last Post: 10-16-2010, 05:19 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 10-13-2010, 10:00 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 05-14-2010, 03:30 PM
By vncj96 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 01-26-2009, 06:59 PM
By jdsdls in forum GM PowertrainReplies: 1Last Post: 06-20-2007, 07:12 AM
Tags for this Thread