Results 1 to 2 of 2
04-08-2011, 05:07 AM #1
well i am looking into adding a lift soon, i am looking for input. i have a 96 4x4 1500. I wanna run at least a 35's. any ideas on sizes and brands would be greatly appreciated.96 Chevy Suburban with a 350. Pretty much stock for now. Mods to come.
04-08-2011, 10:34 AM #2
You will need a 6" lift for the 35's and depending on wheel offset and width you may have to do a little bumper trimming. I have a 6" Rancho on my '96 'burb since '97 and no issues. I had a ProComp on first when 'burb was new and it was junk. Removed after a year and installed the Rancho. The Rancho has a 1-piece welded sub-frame and the upper control arm brackets are cusseted. I have a set of the original MickeyThomspon Alcoa forged wheels, 16x10 and had to trim the bumper just a little.
By blacknight97 in forum Lifted & Offroad SuspensionReplies: 19Last Post: 11-07-2011, 10:05 AM
By dmaiden38 in forum Lifted & Offroad SuspensionReplies: 8Last Post: 12-09-2010, 12:40 PM
By Neverenough896 in forum Lifted & Offroad SuspensionReplies: 22Last Post: 03-23-2010, 05:20 AM
By Slim-pickins in forum Lifted & Offroad SuspensionReplies: 1Last Post: 12-29-2009, 01:41 PM
By NKL&DIME in forum Lifted & Offroad SuspensionReplies: 1Last Post: 11-23-2009, 08:01 PM
Tags for this Thread