Results 1 to 10 of 11
04-12-2011, 11:58 PM #1
Bed shakes some at 40-45mph since i had the lift put on?????
Hey guy's i was wondering what is causing my truc bed take shake around 40-45mph?Anything before or after that speed there is not shaking what so ever and i didn't notice this until i put the lift on.. what could this be if anyone knows and how could i fix this..???
2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
7.5 Inch Rough Country Suspension Lift
RBP Replica Grille Black w Chrome Rivets
Recon Smoked Cab Roof Lights
N-Fab Powdercoated Gloss black Cab Length Nerf Steps
5% Tint over 20% all the way around / 5% Eyebrow Strip
AVS Smoked Window Visors
Z71 Stickers Black & Metallic Silver
Tow Mirrors / Smoked Turn Signals
XM Satellite Radio Fin / Color Matched
Interior Plastic Pieces / Color Matched
Power Acoustic Tweeters
Painted Bowties / Color Matched
Painted Door Handles / Color Matched
Smittybilt Bull Bar / Color Matched
Custom Rolled Edge Exhaust Tips / Color Matched
Custom 2.5 Inch Cat Back True Dual Exhaust
Flowmaster Super 40 Series Dual in / Dual out
Magnaflow Tru-X Pipe
K&N Air Filter
18x9 Rockstars Machined Black
Center Caps / Color Matched
33.13.50 Nitto Terra Grapplers
New Front Wheel Well Liners
Eagle Eye Black L.E.D. Tailights
Eagle Eye Black L.E.D. Third Brake Light / Smoked
Eagle Eye Black L.E.D. Halo Projector Headlights
Notto HID Kit 10,000k Low beams
Recon L.E.D. Light Bar
Buschwacker OE Style Tailgate Cap
AMI Gloss Black Antenna
Debadged Chrome Lettering
Door Molding Removed
04-13-2011, 05:55 AM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Check all of the bed bolts would be my first stop since its not to uncommon for things to either work loose or break when it comes to beds.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
04-13-2011, 09:00 AM #3
This could be the result of a number of things including tires or the result of the lift. I would recommend starting by taking the vehicle back to where you had the lift done. They should be able to assist you further and have a plan for addressing the issue. Please feel free to keep me updated with any further developments. Thank you again and I look forward to hearing from you.
Tricia, GM Customer Service.
04-13-2011, 09:05 AM #4
- Join Date
- Feb 2007
- Blog Entries
When you put the lift on the year, did you make sure to torque all the bolts to spec, and do it again 250-500 miles later? The shaking you're experiencing could actually be the whole rear of the truck wobbling from a loose bolt that's about to let go. Double-check all your bolt torques.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
04-13-2011, 10:18 AM #5
X2 ,check and retorque all the nuts and bolts that were used with the lift kit after 500 miles. Torque to SPEC!
04-13-2011, 05:02 PM #6
yeah i havent had that done that might be the problem i might ask my buddy's to tighten them for me quick one day thanks guy's.
By 04SilverChevy in forum General Chevy & GM Tech QuestionsReplies: 4Last: 11-22-2010, 01:21 PM
By judsteele in forum Lifted & Offroad SuspensionReplies: 4Last: 11-22-2010, 12:30 PM
By 99monguse in forum General Chevy & GM Tech QuestionsReplies: 6Last: 06-10-2009, 08:44 AM
By Xquisitruckus in forum Lifted & Offroad SuspensionReplies: 10Last: 06-10-2009, 06:24 AM
By BuckeyeBandit in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last: 09-27-2008, 06:32 PM