GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 17
  1. #1

    Default New Front Bumper

    I was looking around the net over the weekend and found this bumper. I had one of their other bumpers on my jeep. I was wondering how you think is looks and the sierra.
    http://www.trailready.com/bumpers/im...llbar3_100.jpg

  2. #2

    Default

    I like the lower portion on the bumper. not always a huge fan of the brush guards but I like it.
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

  3. #3

    Default

    You can get that TrailReady bumper in several models, with or without brushgaurd and a pre-runner type bar.

    ---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------

    I like it without the brushgaurd or the pre-runner type bar.

  4. #4

    Default

    a little too roadwarrier/mad max for me

  5. #5
    Legend Bigbomber's Avatar
    Join Date
    Feb 2010
    Location
    Winnipeg,Manitoba,Canada
    Posts
    5,089

    Default

    Quote Originally Posted by dsfloyd View Post
    I like the lower portion on the bumper. not always a huge fan of the brush guards but I like it.
    I agree i'm not a fan of the brush guards either but i love the actual bumper.
    [/SIGPIC]2009 Chevy Silverado LT 1500 EXT CAB 4X4 Vortec 4.8L SFI,K&N air filter,Weathertech Floor Liners ,Weathertech Stone/Bug Deflector, Line X Spray On Bedliner, TruXport Rollup Tonneau Cover, Molded Mudguards, Viper 5701 LE 2 way Security Alarm/Remote Starter, Xm Satelite Radio,BILSTEIN 5100 rear shocks,BILSTEIN 5100 front levelling shocks,READYLIFT 2" rear lift blocks,Goodyear Wrangler Territorys -265/70R 17"

  6. #6

    Default

    I like it
    04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light


  7. #7
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    Man that thing looks heavy. What is the shipping weight that is listed on it? You might have to add on another front leveling kit on your truck
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  8. #8
    Sr. Engineer IPFK83's Avatar
    Join Date
    Jan 2011
    Location
    Jacksonville, North Carolina, United States
    Posts
    318

    Default

    I love those bumpers I was looking at them awhile ago but spent the money on other things, but I would like to get one still love the pre runner bars on them.

    Man that thing looks heavy. What is the shipping weight that is listed on it?
    I know when I was looking at them that was my concern too they said the weight of the bumper was 350 lbs and hadn't had any complaints about the front end sagging.

    ======​SOLD=====
    2006 1500 4x4 extended cab short bed
    SAS 12" suspension lift
    38x15.50 Mickey Thompson ATZ
    20x10 Mickey Thompson Classic II
    FOA custom shocks
    Dana 44HD front axle
    14 Bolt SF w/ detroit locker
    yukon 5.13 gears
    Dynatech Long tube headers
    Dynatech y pipe w/ high flow cats
    Magnaflow muffler
    Tom woods custom dual cv rear driveshaft
    K&N AIRAID system
    Hypertech power programmer
    And much more...........

  9. #9

    Default

    The one I bought for my grand cherokee cost almost as much for shipping as the bumper cost.I had a 9k winch and did have to put a spacer in the springs to try to take up the weight.

  10. #10

    Default

    I keep wanting to replace my bumper with one like this, but then I look at the price tag.
    Last edited by dsfloyd; 04-12-2011 at 03:48 PM.

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. Replies: 5
    Last: 01-04-2011, 01:51 PM
  2. help with front bumper
    By kwconch021 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last: 05-13-2010, 02:43 PM
  3. here is a pic of my ss gen 1 front bumper
    By heavy chevy in forum Chevy Truck Accessories
    Replies: 7
    Last: 11-08-2009, 08:25 PM
  4. Front Bumper
    By chiefholdem in forum Chevy Truck Accessories
    Replies: 6
    Last: 02-04-2009, 08:01 AM
  5. SS front Bumper for 06 Silverado
    By lilt1986 in forum Chevy Truck Accessories
    Replies: 4
    Last: 01-28-2009, 10:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •