Results 1 to 9 of 9
Thread: 95 S10 4.6 TBI, ECM blew
04-23-2011, 07:12 PM #1
- Join Date
- Apr 2011
95 S10 4.6 TBI, ECM blew
Hello, New to the forums and wondering if anyone could help me narrow down my issue. I have a 95 s10 4.3 TBI 2wd. The ECM Fuse recently blew, Ever since replacing the fuse my truck idles very rough from 300-1,200 RPM and sometimes gets stuck at RPMS. I have to floor it in order for it to react, then it will jump to about 5k and idle back down. If I try to drive it the ECM blows randomly I have went through 3 fuses attempting so.
I have never had this issue until that ECM fuse blew. The only 3 things that specific ECM runs/protects is the Computer, Oil Pressure Reg and Fuel pump (So I been told). I have replaced the computer, Unplugged the Oil press reg made no difference. I replaced mass air sensor, Air/Fuel Sensor, EGR Valve gasket, Fuel Filter Cheap things in hopes it would fix it but same results. I'm thinking it's the fuel pump but, I am no mechanic and would like some other opinions before replacing anything else.
Thanks in advance!
Last edited by Alkali25; 04-23-2011 at 07:33 PM.
By kawasaki_kid in forum General Chevy & GM Tech QuestionsReplies: 36Last Post: 12-30-2013, 06:44 AM
By shagginwagon in forum Lifted & Offroad SuspensionReplies: 4Last Post: 07-19-2010, 02:29 AM
By Falcone in forum Audio, Video & Gadget TechReplies: 1Last Post: 08-06-2009, 07:24 PM
By lube70 in forum GM PowertrainReplies: 6Last Post: 04-19-2009, 09:28 AM
By scgamer_99 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 5Last Post: 03-23-2009, 10:44 AM