Results 1 to 3 of 3
04-26-2011, 07:39 PM #1
replacing evaporator coil and heat core
man this looks like a lot of fun here(just kidding). I got a 1998 silverado and I think I need to pull the dash. man why on gods earth did they build this truck this way to change a 50 dollar heater core. Dealer wants 600.00 for labor alone.Anyone already have to do this DYI and do you have any helpful hintsjust the facts mam:great:
04-27-2011, 08:17 AM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Yep already done it a bunch of times..
You will just want to take your time, the dash actually comes off quite easily, just the bolts up by the windshield, and then the ones near the floor on the passenger foot wells.
Once there your heater assembly is actually in open view. Just be careful, and be sure to have the battery disconnected. I took me less than 4 hours out and in with my dash.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
04-27-2011, 08:21 PM #3
- Join Date
- Nov 2010
I replaced my heater core without removing the dash. There are two screws at the back that are a pain, but it is able to be done. Took me about 45 minutes total. Not that hard.
By maury in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 12Last Post: 07-07-2013, 03:29 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 08-18-2010, 09:50 PM
By rondo in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 03-23-2010, 11:22 PM
By billywilly in forum Chevy C/K Truck ForumReplies: 0Last Post: 05-03-2008, 07:13 PM
By billywilly in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 05-03-2008, 06:02 PM
Tags for this Thread