Results 1 to 7 of 7
Thread: idle way high
07-14-2007, 10:10 PM #1
idle way high
ok so my mechanic pointed out to me today that my idle is way too high is there a way i can adjust it? it is a 1989 chevy suburban 350 5.7 tbi
07-15-2007, 07:13 AM #2
Idle in the TBI is controlled by the computer, and other things. Not real familiar with these newer fuel injection systems so I will leave it for more informed members.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
07-16-2007, 05:48 PM #3
ok well my mechanic said its most likely the throttle body gasket and if he's not right eh 2.99 from autozone...
07-16-2007, 07:40 PM #4
It should idle around 700-900. What's it at?Patrick
07-16-2007, 09:50 PM #5
idk exactly but its really high
07-16-2007, 11:04 PM #6
- Join Date
- Jan 2007
- Yacolt, Washington
- Blog Entries
My 87 TBI 350 idles high because the main housing gets worn out where the main butterfly shaft runs through it so it hangs up and keeps the throttle cracked open a bit causing the high idle. If I quickly pop my foot on the pedal and let it pop up it will idle down to normal. I have been told you can have it worked over for a couple of hundred clams but I may just go with a aftermarket TBI instead.Darcy
2006 Silverado 2500HD LT3 4X4 CC SB Duramax LBZ
Tuff Country 6" lift, 35" Toyo M/T's on 20" Ultra Peacemaker wheels, Quadzilla Stealth2 programmer, Diamond Eye 5" cat-back exhaust, factory Special order color Yellow.
07-16-2007, 11:22 PM #7
Love The Beast
It could also be the idle air control (iac) motor. When its idleing high shut off truck for ten sec. & restart it if the idle is down good chance thats it (about $50)
By letmusiclive in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 06-29-2010, 09:49 PM
By jeroen in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 02-07-2010, 04:06 AM
By meatloaf in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 09-23-2009, 11:11 AM
By Chevyguy in forum GM PowertrainReplies: 5Last Post: 11-12-2007, 01:58 PM
By Chevyguy in forum The Coffee Shop ~ Chit ChatReplies: 2Last Post: 09-20-2007, 10:09 PM
Tags for this Thread