Results 1 to 7 of 7
Thread: New halo projectors....
05-19-2011, 09:06 PM #1
New halo projectors....
I got my Halo Projectors from Spyder Auto....I only got one installed because I had taken the low beam out of one to see what type of bulb it was so I could get the HID bulbs for them. Long story short...when i placed the 2 small screws and the metal ring that holds the bulbs in place in the empty box while I installed the other light...a gust of wind sent the box down the dirt road and I lost those parts....so now I am waiting for the replacement from Spyder!
So at any rate here is some photos....
Attachment 27545Attachment 27544
05-19-2011, 10:08 PM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Very nice... When the HID's are in keep an eye on the lens...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
05-19-2011, 10:12 PM #3
Nice lights. It'll look even better when the second one is in, although I kind of like the look.2009 GMC Sierra 5.3L running on E85
Black and chrome
Borla dual exhaust
Chrome Billet grill
4300k High/Low Beam HIDs
Westin Ultimate Bull Bar with PIAA 540s
Blacked-out tail and third brake light
05-20-2011, 03:11 AM #4
Yeah make sure you keep an eye on the len's and inside of the projector's from what i've heard they will melt the projector's plastic in the inside. I have projector's also i think i'm just gonna put some better bulb's in mine most likely some blue Halogen bulbs there not quite as bright as projector's but they are way better than stock also. How much did you pay for your projector's? I paid $390 for mine but mine are allot different and have 2 halo ring's on each headlight along with 3 led lights in between them with 6 led lights on the outside but sure you got a good cheap price on your's look's good buddy here's a pic:Attachment 27546
2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
7.5 Inch Rough Country Suspension Lift
RBP Replica Grille Black w Chrome Rivets
Recon Smoked Cab Roof Lights
N-Fab Powdercoated Gloss black Cab Length Nerf Steps
5% Tint over 20% all the way around / 5% Eyebrow Strip
AVS Smoked Window Visors
Z71 Stickers Black & Metallic Silver
Tow Mirrors / Smoked Turn Signals
XM Satellite Radio Fin / Color Matched
Interior Plastic Pieces / Color Matched
Power Acoustic Tweeters
Painted Bowties / Color Matched
Painted Door Handles / Color Matched
Smittybilt Bull Bar / Color Matched
Custom Rolled Edge Exhaust Tips / Color Matched
Custom 2.5 Inch Cat Back True Dual Exhaust
Flowmaster Super 40 Series Dual in / Dual out
Magnaflow Tru-X Pipe
K&N Air Filter
18x9 Rockstars Machined Black
Center Caps / Color Matched
33.13.50 Nitto Terra Grapplers
New Front Wheel Well Liners
Eagle Eye Black L.E.D. Tailights
Eagle Eye Black L.E.D. Third Brake Light / Smoked
Eagle Eye Black L.E.D. Halo Projector Headlights
Notto HID Kit 10,000k Low beams
Recon L.E.D. Light Bar
Buschwacker OE Style Tailgate Cap
AMI Gloss Black Antenna
Debadged Chrome Lettering
Door Molding Removed
05-20-2011, 04:22 PM #5
According to the manufacture I can use a 35 watt HID and be ok with nothing melting....we will know next week! The install was not hard...just time consuming.
I had to take off the top plastic part that covers the radiator. I only removed the 4 bolts for the grill on the top so I could pull it back slightly. There is one bolt on the bottom out side of the stock light housing. To remove that bolt I took off the 2 screws that hold the bottom trim piece between the grill and bumper. I didnt remove the trim completely, just to the bottom of the light housing as there are clips on the bottom of light housing that the trim snaps in to.
The first light took about an hour to install and put it all back together....
Last edited by sstoner911; 05-20-2011 at 04:27 PM.
05-20-2011, 04:56 PM #6
05-20-2011, 06:02 PM #7
By hardwickn in forum Chevy Truck AccessoriesReplies: 3Last Post: 11-15-2011, 01:45 PM
By reggiecab2000 in forum Lighting DiscussionReplies: 1Last Post: 10-14-2010, 05:09 PM
By rivera5130 in forum Chevy Truck AccessoriesReplies: 6Last Post: 02-10-2010, 12:57 PM
By mashburn in forum Lighting DiscussionReplies: 4Last Post: 08-20-2009, 11:53 PM
By DaveyBoyo in forum Chevy Truck AccessoriesReplies: 9Last Post: 03-03-2009, 08:01 PM