GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1

    Default Where to get good priced exhaust.

    Hey all,

    looking into getting my exhaust done soon, want to do this myself.
    Any websites with decent priced kits? i want duals. (true duels if possible.).. ive been searching around the site but trying to get ideas of places to shop (besides Local)

    ive got a 2011 silverado, Crew, LT 5.3 flexfuel everything proformance/fuel is stock. i will also be in the Market for a CAI (getting the KN or AEM).. thanks for the help.

  2. #2
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,606
    Blog Entries
    1

    Default

    Summitt & Jegs are both good & ship on time.. Summit is a little cheaper.
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  3. #3

    Default

    Hey man try www.autoanything.com they have the best priced product's and offer a discount on top of that! Most sites try to cost way more than them and then use a discount code just to be what theres were priced at before the coupon code! I bought mainly all of my parts from there since they offer free fast shipping and lowest prices!

    2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
    7.5 Inch Rough Country Suspension Lift
    RBP Replica Grille Black w Chrome Rivets
    Recon Smoked Cab Roof Lights
    N-Fab Powdercoated Gloss black Cab Length Nerf Steps
    5% Tint over 20% all the way around / 5% Eyebrow Strip
    AVS Smoked Window Visors
    Z71 Stickers Black & Metallic Silver
    Tow Mirrors / Smoked Turn Signals
    XM Satellite Radio Fin / Color Matched
    Interior Plastic Pieces / Color Matched
    Power Acoustic Tweeters
    Painted Bowties / Color Matched
    Painted Door Handles / Color Matched
    Smittybilt Bull Bar / Color Matched
    Custom Rolled Edge Exhaust Tips / Color Matched
    Custom 2.5 Inch Cat Back True Dual Exhaust
    Flowmaster Super 40 Series Dual in / Dual out
    Magnaflow Tru-X Pipe
    K&N Air Filter
    18x9 Rockstars Machined Black
    Center Caps / Color Matched
    33.13.50 Nitto Terra Grapplers
    New Front Wheel Well Liners
    Eagle Eye Black L.E.D. Tailights
    Eagle Eye Black L.E.D. Third Brake Light / Smoked
    Eagle Eye Black L.E.D. Halo Projector Headlights
    Notto HID Kit 10,000k Low beams
    Recon L.E.D. Light Bar
    Buschwacker OE Style Tailgate Cap
    AMI Gloss Black Antenna
    Debadged Chrome Lettering
    Door Molding Removed

  4. #4

    Default

    Jegs and Summit both have there own exhaust lines ( I'm sure Hearthrob make 'em) that are priced right. Seems to be good stuff for the money.

  5. #5

    Default

    is it possible to get a good cat-back system for 250-350? if so what kind would they be...
    Last edited by USMC_SILVERADO; 05-31-2011 at 08:27 PM.

  6. #6

    Default

    Go to Jegs.com and put in your trucks info for cat-back exhaust and it will give you all the brands and prices.

  7. #7

  8. #8
    Master Mechanic
    KyleZ71's Avatar
    Join Date
    Jun 2010
    Location
    York and Wilkes Barre, PA
    Posts
    855

    Default

    I just put on my kit from them on. Good quality, poor instructions but anyone can figure it out. The pipes are aluminized, mine I purchased was a 2.5'' mandrel bend flowmaster super 10 kit with stainless steel rolled tips. Sounds really nice and I would recommend it. Took a couple hours to clamp together and hang. Cost was $280
    Last edited by KyleZ71; 05-31-2011 at 09:59 PM.
    Objects in mirror are losing

    2003 Chevy Silverado Z71, 5.3L, K&N 57 series, 2.5'' Flowmaster Super 10 series dual exhaust , Corvette Servo, McNew Automotive Dyno tune, SS gauge cluster, Extang Trifecta Tonneau, Pacesetter shorty headers, Goodmark cowl hood, Sony Xplod speakers, Kenwood DDX-470 exhaust tips, 16" Ultra Badlands polished wheels, Pirelli Scorpion ATR .

  9. #9
    Master Mechanic Jimmeh's Avatar
    Join Date
    Apr 2009
    Location
    Columbia Falls, Montana, United States
    Posts
    806
    Blog Entries
    3

    Default

    Personally, if you're willing to drop almost $400, I would just get a couple of mufflers, and find a local muffler shop to put mandrel bent tube under neath it for ya. Mine isn't a true dual, but from the cat back it is all custom bent and routed, and cost me exactly $400 INCLUDING the price of the muffler (which I bought myself from Flowmaster). But that's just my personal preference since I don't know how to use a welder or bend pipe (unless of course it is my own :D)
    2005 Chevy Silverado W/T
    4X4|4.8 with some mods (has only slightly more pull than a 5.3)|Auto|4 door ex cab|Cooper Discoverer AT/3's in 285-75/17's on Helo 842's|Cooper Discover M+S 265-75/17's on Devino DV349's|Flowmaster 40 Single in Dual out with custom bent pipe from the end of the cats back|2" Procomp leveling kit|Custom made center console|Custom dyno tunes|Air Raid CAI|Air Raid Throttle Body Spacer|Apex brand topper|Kenwood Head Unit with Kenwood speakers|Painted mirrors/grille|Debadged except front emblem|Bilsteins front and rear
    Planned mods not in order
    2 inch lift|Custom front/rear bumper|hitch tire carrier|roof basket on topper, bars on cab|finish center console build|install Midland CB|Power options|Tint|Custom made raised bed in the bed of the truck|Lund LunarVisor
    Also have a 1992 Ford Ranger with a lot of stuff done to it. Currently waiting for a bit of a rebuild.


    "The only woman I'm pimping from now on is Sweet Lady Propane. And I'm tricking her out all over this town."

  10. #10

    Default

    I have a couple ideas as I am doing this search myself and am trying to pinch every penny I can. I am looking at either Banks or Magnaflow so that makes it a little difficult to keep the price down. Here is what I've found so far:

    For a complete banks kit I have found no better price than I have here http://performancetruckproducts.com/...manufacturer=9. This is a 2-1 kit that is 3in mandrel bent stainless steel pipe with a 3in straight through muffler to a 6"x5" stainless steel rolled edge tip.

    For a true dual Magnaflow kit I looked up part # 11225 on Amazon and got a great price of somewhere around 60-70 dollars a muffler. Then my local shop would run some alumanized pipe for $150. Add in a X pipe I found on ebay for cheap and you have a true dual setup with quality components for less than $400. Of course if you want stainless and mandrel bent pipes that will of course cost you more.

    I am leaning toward a 2-1 kit as the way that the exhaust has to route down the truck it just about negates the purpose of having true duals. The pipes from the driver side catalytic converter bends right to the y-pipe on the passenger side then run almost the whole length of the truck down the passenger side then would have to split back to the driver side making essentialy a C shape and negating any real performance gains due to many bends in the pipe restricting airflow. Whereas the 2-1 kit from Banks runs straight back from the Y-pipe and out the back with minimal bends in the pipe.

    I just did a quick search and found you could get a Magnaflow part# 12641(30in long) for $108 or 12619(14in long) $75 and have your local shop hang the muffler and run the pipe for you or just cut it in to your factory 3in pipe for ultimate savings. The only difference in the two mufflers I listed is the longer the muffler the more quiet it is. I would go for a 30in muffler but if you want more noise then the 14in would be for you.

    2007 Silverado VortecMAX R.I.P 24JUN2011
    2005 Honda VTX 1300R
    2008 Tahoe LTZ
    2009 Dodge Challenger R/T

Page 1 of 2 12 LastLast

Similar Threads

  1. What is a good exhaust for my Silverado?
    By Chad513 in forum Performance & Fuel
    Replies: 0
    Last Post: 03-20-2011, 06:47 PM
  2. Replies: 7
    Last Post: 01-18-2011, 09:24 AM
  3. Western WA: A good exhaust installer?
    By Bruiser76 in forum Performance & Fuel
    Replies: 2
    Last Post: 09-07-2009, 08:29 AM
  4. 09 silverado exhaust good idea or bad
    By 09silverado in forum Performance & Fuel
    Replies: 3
    Last Post: 03-18-2009, 11:28 PM
  5. Good price for exhaust??
    By MWright936 in forum Performance & Fuel
    Replies: 8
    Last Post: 06-22-2008, 07:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •