Results 1 to 10 of 26
Thread: Exhaust Idea
06-15-2011, 04:20 PM #1
I just want to get a sanity check on the exhaust system i'm pricing.
2.5inch True dual to a 14inch DI/DO magnaflow with turn downs right before rear axle.
Moving the Muffler forward to the cab area to help with the scavenge effect of the built in Xpipe.
Price to install with parts $365.
2009 Silverado 1500
5.3L / 3.73 G80 / 4spd / 4x4 / LWB/ Ext Cab / HD Tow-Haul
2.25in ReadyLift Level Kit / 3in blocks/ 3500lb HellWig / 265x65x17 Wrangler AT
K&N Filter / AirRaid MIT / MagnaFlow 2.25" Dual Exhaust / HyperTech MaxEnergy
06-15-2011, 04:23 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Well that isnt that bad. i know i just paid $250 for duals, from the cat back with 4in stainless tips.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
06-15-2011, 04:27 PM #3
Doesn't sound to bad. We all have found on this site that price varies from state to state and location. I would be more concerned about the quality and reputation of the shop.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
06-15-2011, 04:41 PM #4
After calling a round a bit, it seems the avg price is $300.
Since this is large city, its sorta hard to get any idea on reputation, any particular questions i should ask to help identify a good shop? Back in my home town i would know exactly who to go too....
06-15-2011, 04:49 PM #5
I would start with checking the local BBB and then if you see/hear a truck or car that looks like it has a aftermarket exhaust I would just ask the owner who did there exhaust and if they were happy with the job. You may want to check Jegs and Summit for there brand exhaust systems that are less money than the brand name companies. I think Hearthrob makes there kits.
06-15-2011, 05:01 PM #6
I assume it isnt to bad, from where I am from it would be cheaper but its who you know here The only thing I can advise is to watch so they dont do **** welding, like weld the bottom and not the top of the pipe2002 Chevy Silverado & 1995 Ford Bronco
02 Silverado: 50K miles, 20" Motto Rims, Flowmaster 50 Series
95 Bronco: 160K miles, 4" Superlift, 33/12.5/15 Mickey Thompson
01 Civic: 75K miles, DD
06-15-2011, 05:14 PM #7
I just talked to Meineke, the guy there said i cannot go Dual in as it would void the mfg warranty.
He said GM has a one piece assembly from the manifold to the 3inch flange, and he would have to cut in at the Y pipe behind the cats to get true dual which would cause issues with my warranty. The guy went to on to tell me how customers have complained to him about dealerships screwing them over the situation and he personally wouldnt recommend doing it unless i was prepared to loose my warranty.
I understand about that aftermarket law that passed a little while back, but i had always been told you could do whatever you want as long as its behind the cats. The guy seems real knowledgeable about the situation, was i just misinformed before?
---------- Post added at 05:14 PM ---------- Previous post was at 05:02 PM ----------
Forget about what i just said, I just called my dealer and talked to the shop foreman. he said i can do whatever i want as long as i stay behind the cats. however my original exhaust warranty will be voided. ( i said, well no sh*t its gone. He said exactly, who cares )
Last edited by 98Hotrod98; 06-15-2011 at 05:06 PM.
06-15-2011, 05:15 PM #8
The warranty is only voided on the parts you replace/take off. Sounds like the dealer service writter was being a di*k. Go talk to some dealers in person and see what they have to say. I lifted my truck when it was new and later had some A/C problems. The dealer fixed it under warranty as he said the lift wasn't the cause of the A/C problems. As long as you keep the cats in the original location I wouldn't think there would be a problem.
06-15-2011, 05:32 PM #9
I second what ChromeSilver said. There is a shop in my area that does exhaust work for a descent price. I looked at one of my coworkers trucks to see if I wanted to let them put an exhaust on my truck. I looked under his truck to see how it looked. The weld job was complete all the way around but it looked like a 2 year old welded it. It has been on his truck for almost 6 years with no problems. So I may go to them. He paid $250 for a single glass pack in and dual out. It sounds nice and looks nice if you are standing next to the truck.
06-15-2011, 06:31 PM #10
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
X2, try & find someone who's had work done there & look at the quality of the welds & check if any of them are leaking.
As for the "sanity check"? You're just as sane as the rest of us that are willing to spend lots of money cuz we like em louder, better, & faster1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
By aficio400 in forum The Coffee Shop ~ Chit ChatReplies: 2Last: 11-25-2010, 09:56 AM
By Unbiasedgnu in forum General Chevy & GM Tech QuestionsReplies: 4Last: 02-17-2010, 05:47 PM
By 09silverado in forum Performance & FuelReplies: 3Last: 03-18-2009, 11:28 PM
By Pete95Sierra in forum Chevy Truck AccessoriesReplies: 11Last: 11-05-2008, 11:11 PM
By bill_pfaff in forum The Coffee Shop ~ Chit ChatReplies: 3Last: 03-09-2007, 10:37 AM
Tags for this Thread