GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11

    Default

    They look like the standard body mount bolt up boards. Did you have someone weld them to the body mounts?

    ________2013 4C Rated__________


  2. #12

    Default

    Quote Originally Posted by silveradotrailblazer View Post
    My trucks lifted so I keep a small footstool in the bed of my truck for my wife.
    Thats priceless STB!

    2009 Silverado 1500
    5.3L / 3.73 G80 / 4spd / 4x4 / LWB/ Ext Cab / HD Tow-Haul
    2.25in ReadyLift Level Kit / 3in blocks/ 3500lb HellWig / 265x65x17 Wrangler AT
    K&N Filter / AirRaid MIT / MagnaFlow 2.25" Dual Exhaust / HyperTech MaxEnergy

  3. #13

    Default

    Quote Originally Posted by ajarman View Post
    They look like the standard body mount bolt up boards. Did you have someone weld them to the body mounts?
    I crawled under and looked and they are welded and there are no bolts... and they were on the truck when I bought it
    09 Sierra SLT
    - Denali grille, black HALO headlights, smoked tails & brake light, 20% tint, Carbon fiber interior
    - Top Gun Customz 2.5" leveling kit, 305/55/20 Toyo Open Country AT's on GMC 20's
    - K&N 77 series cold air intake, Flowmaster super 10 series exhaust
    Next up: Smoked fog lights


    2000 Silverado Z71
    - 4" body lift, 315/65/16 Mastercraft Courser AT2 tires
    - Stainless steel Excalibur catback exhaust
    - Lots more to come!

  4. #14

    Default

    Man, that sucks. I guess you would have to either plasma cut them out or just live with them.....at least momma will be happy!

    ________2013 4C Rated__________


  5. #15

    Default

    They are not thick metal, take a sawsaw with a metal cutting blade and cut them off as close to the frame as you can get, then grind it smooth and touch up with either some black spray paint or a can of spray undercoating (I like 3M canned undercoating).

    ---------- Post added at 03:10 PM ---------- Previous post was at 03:05 PM ----------

    I forgot, the tubes most likely have a square flange on the ends. I assume they welded the bars on the frame at these square flanges. If this is how they did it just cut the tubes off as close as possible to the flanges and just leave the flanges there and grid the flanges smooth and spray them as mentioned above. Hope I explained this so you understand.
    :cool:

    2005 Chevy Silverado Z71 Crew Cab
    6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
    17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
    4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
    Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
    B&M aluminum deep transmission pan
    Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
    Weather Tech floor mats
    Cover-Craft seat covers
    Dash mat cover
    Formula One window tint
    One black Lab in rear seat.
    :glasses:

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Step up bars
    By GoDawgs1990 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 9
    Last Post: 05-04-2011, 05:56 PM
  2. will 07 ext cab step bars fit on my 03 ext cab?
    By jordanr1987 in forum Chevy Truck Accessories
    Replies: 4
    Last Post: 03-01-2011, 03:13 PM
  3. step bars - a little help please
    By BrookRx in forum Chevy Truck Accessories
    Replies: 6
    Last Post: 06-09-2010, 07:03 AM
  4. Side Steps/nerf Bars
    By MRFASTPHIL in forum Chevy Truck Accessories
    Replies: 7
    Last Post: 11-10-2009, 06:48 AM
  5. nerf bars, step bars
    By MXZ1983 in forum General Classifieds
    Replies: 4
    Last Post: 09-13-2009, 12:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •