Results 1 to 10 of 11
06-18-2011, 12:11 AM #1
Got my 2006 Silverado Lifted with a 2" level and 3" Body
Finally got my 2006 Silverado lifted with a 2" level kit and a 3" body lift by performance accessories with the gap gap guards.
Here's a before picture
Heres an after pic
heres the tires getting put on whenever my rims get in
What you think? ill post more pics later
2006 Chevy Silverado Crew Cab
3" Body and 2" Level Kit by Performance Accessories
FlowMasters American Thunder Dual Exhaust
Cobra CB radio with a PA speaker
Westin Brush Guard with 2 KC offroad lights
Spectre Performance Cold Air Intake with a Airaid TBS
35/12.50 Nitto Trail Grapplers M/T on 17x9 Ballistic Wizard Rims
Tractor Supply Black Diamond Low Profile Toolbox, with 8' Whip antenna
Big "Redneck" sticker and aftermarket confederate Z71 Sticker
06-18-2011, 11:08 AM #2
Looks good so far, it will look great with the wheels and tires!!:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
06-18-2011, 12:02 PM #3
06-18-2011, 01:37 PM #4
There sweet wheels and will look good with the red truck. What size are the wheels??
06-18-2011, 02:08 PM #5
Theyre 17x9 wheels with 35x1250x17 Nitto Trail Grappler M/T tires
06-18-2011, 02:43 PM #6
Tire clearance in the front will be close. I have a 6" suspension lift with the torson bars crank alittle, 17X9 wheels and 35" tires and I still had to trim my front bumper.
06-18-2011, 02:55 PM #7
yea thats what the mechanic that lifted my truck said i might have to do, im pretty sure i got to also. When the rims get in, im getting them mounted and balanced and installed on my truck for 60, then ill see how much i got to trim. How much you have to trim for your setup?
06-18-2011, 05:22 PM #8
We had to trim the bumper lip just a little where it folds around into the wheel well. Just becareful the first time you take it off-road and turn the wheel with the suspension compressed, thats when she'll rub and tear/cut a tire. Maybe have someone guide you and look at the tire to see if its going to hit the fender or bumper.
06-18-2011, 11:47 PM #9
alrite thanks and the mechanic probly gonna help me with that seeing where it would probly hit, and i plan on replacing my stock shocks with rancho ones. i found a deal on them like 165 for all four with free shipping and then 50 dolllar mail in rebate for buying 4 racho shocks
06-19-2011, 02:32 AM #10
That looks nice. I really like the rims. If I can give you a suggestion I would try to find a way to put a red strip on the rims.
By bigohagen in forum Photo & Video GalleryReplies: 29Last: 06-14-2011, 09:00 PM
By southlak9cop in forum Lifted & Offroad SuspensionReplies: 5Last: 03-31-2011, 08:31 PM
By jasttn in forum GM PowertrainReplies: 1Last: 03-22-2011, 07:17 AM
By PJr in forum Chevy Truck AccessoriesReplies: 2Last: 06-07-2010, 10:14 AM
By MAsZ71 in forum Wheels & TiresReplies: 15Last: 01-02-2010, 08:51 AM
Tags for this Thread