Results 1 to 3 of 3
06-27-2011, 07:09 PM #1
- Join Date
- Mar 2010
3 in. body lift and 35's, possiable?
im thinking about running a 35x 12.5.17 tire. would it fit with a 3in. body lift and cranked t bars. rims would proably be 4.5 offset. i saw a avalanch running 325/65/18 stock no rubbing.
06-27-2011, 08:00 PM #2
I assume your talking about a '03 Sierra 4x4. You need 6" of lift to run 35's. Look at my photo album, thats a 6" lift with the torson bars crank just a little and 35" tires. The wheels are 17x9 with 4.5" backspacing. I still have to trim the front bumper a little.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
06-27-2011, 09:00 PM #3
By brownboyz71 in forum Lifted & Offroad SuspensionReplies: 8Last Post: 03-09-2011, 05:25 PM
By bacol14 in forum Photo & Video GalleryReplies: 18Last Post: 08-31-2010, 11:35 AM
By Silverado 4X4 in forum Chevy Silverado Forum (GMC Sierra)Replies: 7Last Post: 07-16-2010, 01:18 PM
By Buckhunter11b in forum Lifted & Offroad SuspensionReplies: 1Last Post: 02-15-2010, 07:15 PM
By Jimbo74 in forum Lifted & Offroad SuspensionReplies: 9Last Post: 04-12-2009, 12:00 PM
Tags for this Thread