Results 1 to 1 of 1
07-03-2011, 09:22 PM #1
- Join Date
- Jul 2011
1998 Chevy 1/2T, Fuel pressure regulator vacuum hose ???????????
I recently replaced head gaskets and cleaned everythin in the process including the throttle body 'spider'. When I tried to start, it acted like there was too much compression to turn the engine but battery and starter are good. So I took the plugs out and it turns over great but I noticed there was entirely too much fuel coming out of back (5,6.7) three cylinders, and none or very little coming out of the front (1,2,3) 3 cylinders. I took the upper manifold off to view the CTB Spider and noticed a whole bunch of fuel coming out of the Fuel Pressure Regulator when trying to start. should there be a line hooked up to this FPR or does it work of the vacuum in the manifold?
By kspeng in forum GM PowertrainReplies: 3Last Post: 07-14-2010, 04:56 PM
By drradon in forum Performance & FuelReplies: 18Last Post: 05-20-2009, 08:55 PM
By Cros89 in forum Performance & FuelReplies: 7Last Post: 12-05-2008, 09:06 AM
By Moonie in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 06-14-2008, 01:11 AM
By Soonerfan in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 07-19-2007, 07:01 PM
Tags for this Thread