Results 1 to 3 of 3
07-05-2011, 10:21 PM #1
- Join Date
- Jun 2011
Solid axel and 2wd to 4wd upgrade?!
Hi my names Sam im looking to do a solid axel swap in the front of my 1989 Chevy C2500 it also only 2wd and im wondering about a 4wd conversion as well. Any help, tips, or useful links would be greatly appreciated.
07-06-2011, 11:08 AM #2
Welcome to the club, Sammy. Anything can be done if you have/want to spend the money. Some guys prefer to start with a 2wd because that lets them choose the transfer case the want to run. Theres tons of info on axle swaps on-line. If you have the skills to do yourself then you will save a ton of money, if you don't have the skills then get the check book out. One last thing, no matter who does it don't skimp on parts or you WILL PAY more in the end.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
07-06-2011, 12:39 PM #3
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Sam do a search on this site I'm sure you'll find plenty of info, thats been a popular question for a few years.
By chvy411 in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 03-16-2011, 11:13 PM
By Quad racer#212 in forum Chevy S10 Forum (GMC Sonoma)Replies: 5Last Post: 11-01-2010, 10:24 AM
By LoneWolf'burban in forum GM PowertrainReplies: 3Last Post: 06-06-2010, 09:44 PM
By cjtreibel70 in forum Chevy C/K Truck ForumReplies: 1Last Post: 05-07-2009, 10:12 PM
By dynodon in forum GM PowertrainReplies: 7Last Post: 12-13-2008, 04:21 PM