Results 1 to 3 of 3
07-12-2011, 05:35 PM #1
- Join Date
- Oct 2009
2006 Chevy 1500 - Acceleration slip
I have a 2006 Chevy 1500, 4X2 with 5.3L...103,000 miles.
When starting from a stop there is a small slip in the transfer of power...no slip when starting from a slow roll. Same symptoms in reverse.
Thoughts? Thanks in advance.
---------- Post added at 05:35 PM ---------- Previous post was at 04:47 PM ----------
Update and more advice...with truck in nuetral the driveshaft will rotate 1/2 - 3/4" and makes a kncoking noise if rotated back and fourth. U-Joints?
07-14-2011, 09:42 AM #2
Has this concern been resolved? Have you brought this to the attention of your local dealership? I can also look into this further for you with your VIN. Please feel free to contact me via private message as well. Thank you in advance.
Tricia, GM Customer Service.
07-14-2011, 10:04 PM #3
Possibly U-joints. Cheap and relatively easy to fix! Mine were bad by 108k miles. Mine is a 4x4 so I replaced both joints.
Clifton, aka Clif, aka Jones, aka by all as dumbass
2002 Chevy 1500, 4.8L, 4X4 (Work/Play truck, Mods soon)
1977 chevy 3/4 ton pickup (the "Grey Ghost"-Grandpas old ride)
1992 Mustang 5.0 (parts bought, just need install)
2008 Kia Optima (bleh. Fiances car. It does nothing special)
By ChevyFan in forum Chevy Trucks For Sale eBayReplies: 0Last: 03-19-2011, 10:30 PM
By 88chevytruck in forum Lifted & Offroad SuspensionReplies: 5Last: 01-21-2010, 04:21 AM
By dougsimp in forum GM PowertrainReplies: 0Last: 09-23-2009, 01:29 PM
By patrad in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 01-10-2008, 11:35 AM
Tags for this Thread