GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 90 K1500 clutch job

    Just replaced the clutch in 90 k1500 and now the clutch fork is binding. I had to get a new clutch fork from autozone ($50) because the old one was cracked severely at the pivot ball. the new throwout bearing that came with the clutch kit didn't seem to fit the new fork as tigh as the old one, but used it anyway due to the lack of funds, got it all back together and now the clutch won't disengage. I bled the clutch system and double checked the operation of all components. Everything checks out, and now, I can't even manuever the fork with a prybar through the inspection hole. Any advice or know how of what to look for when i take it apart in two weeks??

  2. #2


    Just an update. After the longest two weeks ever (more like 3 months) I finally got it fixed. The problem was that Autozone sold me the wrong clutch fork. I ended up replaceing it with an ACDelco from Rock Auto.

Similar Threads

  1. 97-98 k1500 dash compatable with a 95 k1500?
    By Lifted_Bowtie in forum General Chevy & GM Tech Questions
    Replies: 5
    Last: 12-11-2010, 04:51 PM
  2. Replies: 0
    Last: 07-30-2010, 07:00 PM
  3. clutch job
    By bucklti in forum GM Powertrain
    Replies: 0
    Last: 03-05-2010, 08:42 PM
  4. 90 k1500 clutch won't engage
    By gt1009 in forum GM Powertrain
    Replies: 1
    Last: 12-01-2009, 09:02 AM
  5. How do I know if my fan clutch is bad?
    By OldPitPony in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 09-27-2009, 10:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts