Results 1 to 6 of 6
Thread: Rusted Crossmember
07-15-2011, 12:10 AM #1
I'm fixing my truck up and making it look nice again. Its a 1997 k2500. I replaced all the body panels on it and I'm going to replace the box soon. Anyways, I was underneath cleaning the rust off of my frame and coating it with the bed coating when i discovered the crossmember between the cab and the box was half eaten away where it connects to the frame. One of the straps for the fuel tank hangs on this crossmember. I am wondering where i can buy a replacement crossmember. The rest of my frame is still thick and there are no rust holes anywhere else on it. Right now, it wont pass inspection with the crossmember in that condition. I only have 110,000 miles on the truck and would like to keep it on the road. Here is a picture from below on the passengers side.
Last edited by Patrick S; 07-15-2011 at 12:20 AM.
07-15-2011, 04:12 AM #2
I'm thinking that the crossmember is most likely riveted in. yes you could replace it, however I'm not sure if you could purchase a new one, most likely will have to find it in a salvage yard.
07-15-2011, 04:51 AM #3
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
I think LMC or GMpartsdirect should have it...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
07-15-2011, 02:48 PM #4
- Join Date
- Apr 2011
What about having a new piece fabbed? I wonder if that would be cost effective if you can't locate a good replacement. I wouldn't think it would be too complicated at all for a good metal man.
07-18-2011, 09:29 PM #5
Thanks for the suggestions. I found the crossmember at gmpartsdirect.com for $128. Im going to be replacing it within a week or two when my new box that I ordered from ohio comes in. Once I get that replaced. Im getting it undercoated with a tar like undercoating from Line X of buffalo.
07-18-2011, 10:07 PM #6
I found one on gmpartsdirect for $128. I will be replacing it when my new box comes from ohio within the next two weeks.
By BillM in forum GM PowertrainReplies: 7Last Post: 04-19-2011, 11:06 AM
By ASMODEAN in forum General ClassifiedsReplies: 0Last Post: 04-29-2010, 10:19 AM
By serealport in forum General Chevy & GM Tech QuestionsReplies: 10Last Post: 07-13-2009, 06:55 PM
By Rice in forum General Chevy & GM Tech QuestionsReplies: 8Last Post: 03-19-2009, 10:59 AM
By voodoo 350 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 07-31-2008, 08:30 PM
Tags for this Thread