GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Hybrid View

  1. #1

    Default Master Cylinder is it Bad?

    How can I tell if my master cylinder needs to be rebuilt or replaced? 2001 suburban 1500 4x4. On a recent road trip the red brake light and ABS light come on and stay on. Then the next day no red brake light or ABS light. the brakes are soft to the touch and have recently been replaced.

  2. #2
    Moderator

    Davandy's Avatar
    Join Date
    Jun 2005
    Location
    Haasdonk Belgium
    Posts
    1,550

    Default

    Never take a change with brakes , if you can't diagnose it yourself let a professional take a look at it.
    Peter Smet
    Haasdonk, Belgium

  3. #3
    Jr. Mechanic
    Join Date
    Jul 2007
    Location
    Washington State, the Dry Side ( Southeastern)
    Posts
    112

    Default

    My 95' had a similar situation with the ABS Light and Brake light. The lights would flash on and off and sometimes stay on....long story short....2 problems One....an ABS wheels sensor was shortening out and two the ABS module had hard fault codes that could not be fixed. Anyway.....You need to have a scope that can read the code to really figure out what is going on...you can replace parts for a long time without a proper scope...Take it to someone that can diagnose the problem correctly.

    Don't mess around....ABS goes out you may not have brakes . period.
    Just Another Day in Paradise...

  4. #4
    Legend
    TrailLeadr's Avatar
    Join Date
    Jun 2005
    Location
    Coventry, Rhode Island
    Posts
    3,103

    Default

    Quote Originally Posted by Dj Friction View Post

    Don't mess around....ABS goes out you may not have brakes . period.
    You're absolutely right. This has become my new quest to make sure people know that the ABS light doesn't only mean they may not work when needed, but could activate when they're NOT needed. Making it impossible for you to stop in time to avoid a catastrophy.

    Do the right thing, and take it to a qualified tech to diagnose.
    Patrick
    Rhode Island


  5. #5

    Default master cylinder

    thanks guys for your input. I just finished a 2000 mile trip and the brake and abs lights were on for the first half and not on for the second half of the trip. hopefully the dealer can diagnose without the lights on.

Similar Threads

  1. Where is my clutch master cylinder?
    By gt1009 in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 12-13-2009, 08:18 AM
  2. 89 s10 clutch master cylinder/bleeding
    By jackofallammo in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 11-17-2009, 09:38 AM
  3. master cylinder wire????
    By kylegillean in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 07-20-2009, 12:24 PM
  4. New master cylinder or rebuild kit
    By ACracing in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 06-22-2009, 08:32 AM
  5. Swapping out Master Cylinder ???'s
    By 4x4_only in forum Lifted & Offroad Suspension
    Replies: 3
    Last: 11-01-2008, 06:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •