Results 1 to 10 of 10
07-19-2011, 01:36 AM #1
finally found the intro page! newb to the intro page lol
been a member of gmtc for a couple months now, since then ive turned my t-bars up 4 turns, ie. 1 inch front end lift, n i just installed a set of tuff country add a leafs to the rear about 3 days ago, figured since i was replacing pads, rotors and calipers all the way around i oughtta letter off the jack with a lil more ride hight at the same time.. the kit came with a set of re-indexed keys as well.. tried gettin my stock keys out with a 2 jaw puller, worked awesome til it came time to get the key to free up from the bar, no help from pb, smoke wrench n a bfh so im either gonna try usin the puller like a guy on here said he did a while back or just have the shop thats gonna have to do my algnmt put em in.. with the bars turned up it sat damn near level with 1 inch in the front(35") n the 2" stock block in the rear(36"), now with the extra leaf in there im at (39.5") so its got some serious rake again so id like to get the new keys in ASAP! 2" BL is ordered n oughtta be here in a couple days so i wanna finish the front end soon. orderin the steer stab n tie rod sleeves next week n slappin on some wheel spacers( .25" frnt, 1.5" rr) savin up for a 4" susp. n gonna replace my 2" block with a 3".. when im done it'll have 8"s up front n 6.5" in the back..
i havent figured out how to post pics yet so i'll be sure to soon as i do!
07-19-2011, 09:01 AM #2
07-19-2011, 11:48 AM #3
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
07-19-2011, 11:59 AM #4
07-19-2011, 12:06 PM #5
Welcome to the club. Hows the truck ride with the t/bars indexed keys cranked?:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
07-19-2011, 02:58 PM #6
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Welcome to the club Greg1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
07-19-2011, 06:47 PM #7
- Join Date
- May 2011
- Upstate South Carolina
- Blog Entries
Welcome aboard!86 911 Porsche Carrera
98 K1500 Suburban LT
2012 Nissan Leaf
General Motors. Because life is too short to drive a Ford
07-20-2011, 01:42 AM #8
thanks guys, she dont handle too bad, ya deff notice it goin down the road on a highway or somethin when ya turn the wheel theres less play its way more responsive and wants to change lanes which i kinda like for passin cars n stuff cuz its a quick whip n yer sling shot right around em, but an alignment is deff needed i can notice the front tires are toed in just enough to bother me and as far as the ride its not really "stiffer" cuz that sounds bad but id say its deff less spongy when yer goin thru soft ground it doesnt slosh around as much as i always felt it did before..
talked to a guy on the phone today, droppin the truck off in the am on my way to work n pickin her up on the way home, havin the new keys put in n the alignment done so im pretty stoked to see how the steering differs n ofcoarse how itll look lol
finally figured out how to post pics so ill take a couple in the am b4 n a couple when i get'er back
thanks again, BFG..
07-20-2011, 08:27 PM #9
FAIL! took my truck in today n the guy at the shop had no idea what he was doing.. after showing him the key n how it goes in, explaining to him that a 2jaw puller works awesome for removing the preload from the bar to remove the adjuster bolt, and showing him the area in the directions where it says a 2jaw puller is what can be used.. they called me back 4 hours later sayin they cant do it because you need a special tool to do it.. im 40 feet up on a 12-12 pitch roof and im like hey what about a 2 jaw puller?? the guys like uhhh we cant do it.. so i picked it up today with nothin done to it so i didnt pay em a dime n left..
bummer.. i really hoped to have it done as im goin to connecticut tonite..8hr drive! .. n i wanted th alignment done before the long haul..
08-19-2011, 05:46 PM #10
Welcome to the site![/SIGPIC]2009 Chevy Silverado LT 1500 EXT CAB 4X4 Vortec 4.8L SFI,K&N air filter,Weathertech Floor Liners ,Weathertech Stone/Bug Deflector, Line X Spray On Bedliner, TruXport Rollup Tonneau Cover, Molded Mudguards, Viper 5701 LE 2 way Security Alarm/Remote Starter, Xm Satelite Radio,BILSTEIN 5100 rear shocks,BILSTEIN 5100 front levelling shocks,READYLIFT 2" rear lift blocks,Goodyear Wrangler Territorys -265/70R 17"