GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 7 of 7

Thread: tire pressure

  1. #1

    Default tire pressure

    I have some Terra Trac Hercules tires on my 01 silvy 6 cyl. longbed 4x4. reg. cab. Max 36 psi. This is a wood hauler only...do you think 30 psi is a good general pressure..??

  2. #2

    Default

    I would go buy what the tire pressure sticker inside the drivers door jam recommends. Years ago the BFG rep. was in our shop and we discussed tire pressures for stock or oversize off-road type tires and he said go by the door stickers. I've had oversize tires on all my trucks and go by the door stickers and I've never had a tire problem and have good tire wear.
    :cool:

    2005 Chevy Silverado Z71 Crew Cab
    6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
    17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
    4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
    Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
    B&M aluminum deep transmission pan
    Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
    Weather Tech floor mats
    Cover-Craft seat covers
    Dash mat cover
    Formula One window tint
    One black Lab in rear seat.
    :glasses:

  3. #3

    Default

    tires are not stock.... anyone else..???

  4. #4
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,361

    Default

    As said above Look in the door . I always keep 38-42 in my tires..
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

  5. #5
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    Quote Originally Posted by 9191gmc View Post
    tires are not stock.... anyone else..???
    Since you're going to be hauling wood in this truck (maybe a couple to three thousand pounds) I'd up your tire pressures to whatever the max is that is written on the sides of your tires. The tire pressures on the door sticker is kind of a compromise between ride quality, wear, & MPG.
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  6. #6

    Default

    max is 36 and I put 30 in there because I ruined a set of small car tires by running them max. 30 is workable ,no??

  7. #7
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    30 psi might be alright. What you need to do is put the heaviest load of wood on it that you're ever going to haul, (green unseasoned hardwood) & then see if the sidewalls are bulging out. If they are you'll probably want to up the pressure, otherwise it's not going to handle well. When loaded the azz end is going to squirm all over the place anytime you're over 30 mph & the tread will wear off the outer & inner edges first instead of wearing evenly across the whole tread width. Are you putting side boards on this to haul the maximum loads, or are you only going to haul loads up to the top of the bed rails?

Similar Threads

  1. BFG T/A KO Tire Pressure?
    By 1flyfisher in forum Wheels & Tires
    Replies: 2
    Last: 05-28-2010, 08:16 PM
  2. Tire Pressure??
    By coryv71 in forum Wheels & Tires
    Replies: 5
    Last: 03-24-2010, 04:30 PM
  3. tire pressure
    By spazzoid13 in forum Wheels & Tires
    Replies: 10
    Last: 12-21-2009, 08:19 PM
  4. Tire Pressure
    By Restlessone in forum Wheels & Tires
    Replies: 3
    Last: 10-08-2009, 08:01 PM
  5. 10 ply tire pressure
    By carrfire in forum Wheels & Tires
    Replies: 4
    Last: 03-28-2009, 04:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •