Results 1 to 1 of 1
Thread: Back Up Lamp Problem
08-07-2011, 03:07 AM #1
Back Up Lamp Problem
For some time now, my reverse lights have been kinda intermittent. I had to push up on the shifter to get them to come on, and now they have went out.
Checked fuses, wiring, bulbs, connector plate, all good. Unhooked plug which was in front of the trailer wires (closer to cab) and checked with a test light. Signals and tail lit test light, reverse didn't. Time to break out the service manual.
Flippin through the diagnosis page, It says faulty or misaligned gear selector switch. I know it's on the column on my truck, but I ain't got the slightest clue on how to adjust it. It says to check if its faulty, get a test light and check the reverse light connection. Neither make the test light glow when its in reverse, but it says the dark blue wire's connector won't light if its faulty. So that leads me to believe it needs adjusting.
So exactly how do I adjust it? Also, do yall think I'm going in the right direction or I missed something.
Can't remember if its in my sig or not, but 89 GMC Sierra K1500, 350 turbo tranny.
Last edited by Z71 Coltman; 08-07-2011 at 04:27 AM. Reason: Added extra detail.
89 GMC Sierra (First Love)
4 inch lift 35x12.50s
350 Small Block, Bigger Cam, Eldebrock Valve Covers (For the extra purdyness)
By BiG Chris in forum General Chevy & GM Tech QuestionsReplies: 17Last Post: 02-20-2012, 01:20 PM
By sierra blues in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 09-25-2010, 10:12 PM
By radiovoicemike in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 03-29-2009, 07:27 AM
By bart6180 in forum Lifted & Offroad SuspensionReplies: 4Last Post: 10-30-2007, 09:14 AM
By Jim Andrews in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 03-13-2007, 10:51 AM