Results 1 to 5 of 5
Thread: My (new to me) truck toolbox
08-07-2011, 04:17 PM #1
My (new to me) truck toolbox
First some background info.....About a month ago my friend's dad traded in his 2001 Silverado 2500hd CCLB for a Chevy HHR, not quite sure what persuaded him to do so but he claimed he didn't need such a big truck any more and that the cost of filling up the truck was getting too costly, so he traded it in. Before he did so, he took off all the aftermarket items he purchased for the truck. One of them happened to be a plastic Delta toolbox he had, nothing fancy but it worked. Long story short, he gave me the toolbox for free and now it resides in my truck. It was a little rough around the edges when I first got it but after hosing the toolbox off and cleaning it with some Simple Green followed by a healthy application of Armor All, it looked almost new
Also, the toolbox is bolted to rails attached to my BackRack, so I didn't have to drill into my truck's bed.
I also like how there's some space underneath the toolbox, so I can still fit long items in the bed and more crap underneath the toolbox lol.
Not a big fan of the gullwing-style lids but ehh, it was free so I'm not gonna complain.
Just a few of the tools I have in the box, I also have a blanket, extra turn signal bulbs, fuses, wire connectors & terminals, zip ties, electrical tape, bungee cords, work gloves and some other stuff.
Overall I'm quite satisfied with my latest acquisition, though I do plan on upgrading to a nice diamond plate metal toolbox at some point in the future when funds allow.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
08-07-2011, 04:23 PM #2
Any free truck part is always good!!:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
08-07-2011, 04:51 PM #3
Free is the best! Looks good even if it wasn't free though.Adam
08-07-2011, 05:13 PM #4
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Looks good Telor & the price was certainly right. Gull wing doors aren't so bad. Makes it easier to get stuff in & out. Imagine having a single lid with rear pivot hinge. You wouldn't even be able to reach the center lock/latch without climbing in to the bed, unless you had arms as long as an orangutan1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
08-07-2011, 08:08 PM #5
ya free is always good!! i got a weather guard diamond plate box that fits down inside the rails from work for free. can't beat free!!!!
2002 Tahoe LT---------TINTED WINDOWS------------7" DUAL DVD INDASH
By Breathtaker in forum Chevy Truck AccessoriesReplies: 5Last Post: 06-15-2009, 12:25 PM
By bphenwood in forum Chevy Truck AccessoriesReplies: 3Last Post: 01-27-2009, 01:35 PM
By SilveradoBrett in forum General ClassifiedsReplies: 1Last Post: 10-17-2008, 12:55 AM
Tags for this Thread