Results 1 to 9 of 9
Thread: Bull Bar or Brush Guard?
08-17-2011, 11:38 AM #1
- Join Date
- Dec 2010
- Austin Tx
Bull Bar or Brush Guard?
Going back and forth and not sure which to go with. Four options here. 1) Black brush guard 2) Stainless Steel Brush Guard 3) Black Bull Bar or 4) Stainless Steel Bull Bar.
I do know that I will later be adding a Black Weatherguard Low Profile Tool Box. Should I take this in choosing my front end options as well as the trims and accents I have now?????
I welcome all of y'alls input. Looks like we have a ton of folks on here with some great looking Rigs.
08-17-2011, 12:11 PM #2
- Join Date
- Feb 2007
- Blog Entries
Definitely a black brush guard. I would never consider a bull bar because they're for appearance only and have no utility to them.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 199K miles
2005 Saturn ION-2 Stock 255K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
08-17-2011, 12:30 PM #3
X2, black brush guard, much stronger than a bullbar. If you think you may want to put a winch on your truck in the future then make sure you get a b/guard that is winch compatible, has a winch plate.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
You can by the Warn brush gaurd without the winch plate and then if you decide to add a winch you can then buy the winch plate for that brush guard.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
08-17-2011, 12:43 PM #4
been looking at brush gaurds for my truck as well. wanna get it leveled first.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
08-17-2011, 04:04 PM #5
- Join Date
- May 2009
- Blog Entries
I would go with a SS Brush Guard. It gives you more options for additions in the future. I think SS because it would match the wheels and grille much better.
2002 Suburban 4x4 LS 9 Passenger
1991 Ford F-150
08-17-2011, 04:28 PM #6
I'm gonna say black brush guard as well. Looks better in my opinion and more functional/ practical than just a bull bar.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
08-17-2011, 04:43 PM #7
I'd say a bull bar if you just want somethin for looks otherwise it would defeat the purpose of getting a brush guard and also a winch. I only paid $150 for my smittybuilt powdercoated gloss black bull bar and i love it. I am thinking about replacing my front/rear bumper with Fab fours with bull bar built in it with fog lights and a winch hook up all color matched! I'd say just do what you wanna do and if your on a budget get what you can if you need a brush guard go for it man! We all have our opinions about what we like and don't like..
2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
7.5 Inch Rough Country Suspension Lift
RBP Replica Grille Black w Chrome Rivets
Recon Smoked Cab Roof Lights
N-Fab Powdercoated Gloss black Cab Length Nerf Steps
5% Tint over 20% all the way around / 5% Eyebrow Strip
AVS Smoked Window Visors
Z71 Stickers Black & Metallic Silver
Tow Mirrors / Smoked Turn Signals
XM Satellite Radio Fin / Color Matched
Interior Plastic Pieces / Color Matched
Power Acoustic Tweeters
Painted Bowties / Color Matched
Painted Door Handles / Color Matched
Smittybilt Bull Bar / Color Matched
Custom Rolled Edge Exhaust Tips / Color Matched
Custom 2.5 Inch Cat Back True Dual Exhaust
Flowmaster Super 40 Series Dual in / Dual out
Magnaflow Tru-X Pipe
K&N Air Filter
18x9 Rockstars Machined Black
Center Caps / Color Matched
33.13.50 Nitto Terra Grapplers
New Front Wheel Well Liners
Eagle Eye Black L.E.D. Tailights
Eagle Eye Black L.E.D. Third Brake Light / Smoked
Eagle Eye Black L.E.D. Halo Projector Headlights
Notto HID Kit 10,000k Low beams
Recon L.E.D. Light Bar
Buschwacker OE Style Tailgate Cap
AMI Gloss Black Antenna
Debadged Chrome Lettering
Door Molding Removed
08-17-2011, 10:23 PM #8
I had a bull bar for a while and took it off. Just looks cleaner without it IMO. For your truck I would go with a SS brushguard, to match your chrome wheels, steps, handles/mirrors.
08-18-2011, 07:33 AM #9
Not a big fan of the bull bars.....I vote black b/gard.
________2013 4C Rated__________
By coldsteel1993 in forum Chevy Parts eBayReplies: 1Last Post: 03-22-2011, 12:34 PM
By Country_Boy92 in forum Chevy Truck AccessoriesReplies: 5Last Post: 02-08-2011, 05:12 PM
By 15silverado00 in forum Photo & Video GalleryReplies: 25Last Post: 02-27-2010, 06:35 PM
By 96silverado in forum Chevy Truck AccessoriesReplies: 3Last Post: 01-27-2010, 10:24 PM
By 95_Silverado in forum General ClassifiedsReplies: 3Last Post: 05-17-2009, 12:44 PM