Results 1 to 2 of 2
08-17-2011, 02:54 PM #1
- Join Date
- Jan 2011
1975 chevy 3/4 ton 2x4 with 1986 350... stall troubleshoot..
I have a 75 chevy with a 350 out of a 86 GMC (if it makes any difference). The other day i drove it until the truck was warmed up, shut it off and started it within 5 minutes and went again. When coming to a stop sign it stalled out on me and wouldnt start. Drained the battery trying to start it. I pulled it home which was a mile away and it still wouldnnt start with the battery charger, just turned over and over. Around 5 or 6 hrs later i went to start it and it fired right up. So my question is obviously what made it stall out? please help! Thanks!!
08-17-2011, 03:47 PM #2
- Join Date
- Feb 2007
- Blog Entries
There is an ignition module under the distributor cap that is notorious for producing issues like you described. I can't recall its proper name at the moment, but that would be the first place I'd look.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 199K miles
2005 Saturn ION-2 Stock 255K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
By meby in forum GM PowertrainReplies: 0Last Post: 08-17-2011, 11:36 AM
By Steve in forum Chevy Corvette ForumReplies: 0Last Post: 07-21-2010, 10:20 PM
By tvm33 in forum Performance & FuelReplies: 0Last Post: 04-16-2010, 05:51 PM
By daddytech in forum GM PowertrainReplies: 3Last Post: 01-04-2010, 10:27 PM
By regal557 in forum Lifted & Offroad SuspensionReplies: 5Last Post: 07-18-2009, 09:43 AM
Tags for this Thread