having problem radio wiring. i bought the wiring harness so i wouldnt have to cut any of the factor wires. when i hook the my new radio up, only 4 of the speakers play (the front and the 4x10 in the back). when i hook the factory radio back up, all six of them works. nedd help tryin' to figure this out



What's the stereo type and what type of connector did you buy?
Steve
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Search Before Posting | Fill out Your Profile & Signature
My Trip to GM Detroit | Meeting w/ GMC, Buick & Cadillac
Replacement Chevrolet Tires
cc-2014 general motors 1988-up (21pin) its the right one. i hooked up hundreds of radios before and never had this problem
cc-2014 general motors 1988-up (21pin) its the right one. i hooked up hundreds of radios before and never had this problem
I think the reason he asked was there were two factory setups, one with 4 speakers and the other with 6 speakers. Easy mistake, but one you probably wouldn't make.
93 Suburban 2500, 454, 4x4 tow vehicle
77 Trans Am, 9 sec pump gas street car, Pontiac Power
Bookmarks