GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default What would you do?

    I have a Beautiful 1994 GMC 2500 4X4 with a 6 Inch Lift that runs and drives great. Yesterday, I picked up a 1997 Tahoe with a Whipple supercharger and a built Vortec. The previous owner was moving and after going through multiple trannies was finished with the project and I picked it up for a deal I couldnt turn down. Anyways, as you all know the 94 isnt a Vortec. What would you all do? Should I do the swap with the Vortec and the Whipple? Is there anyway to make the Whipple work on my motor now? Any interest if I were to sell the Whipple? How hard is the swap? I never thought I would have this opporunity and it may be too much work? Thanks my number is 425 322 9954 if it is easier to speak on the phone. ThanksClick image for larger version. 

Name:	UPS reciept 008.jpg 
Views:	44 
Size:	21.9 KB 
ID:	29663

  2. #2

    Default

    welcome to the club! beautiful truck you have, sorry i cant be to much help on the idea of the swap.
    Go-Recon "xtreme" amber scanning tail gate light strip, Cobra ultra2 CB radio W/ 4 foot firestix antennas, dual exhaust with 40 series single in dual out muffler, 305/65R17 Mickey Thomson Baja ATZ on 17 inch Mickey Thompson Side Biters, 3 inch body lift

    "when the going gets tough the tough get cyclic:fighting0019:"
    "use the force luke:fighting0040:"

  3. #3

    Default

    Well, Thanks. It sounds like a fun project just dont want to get over my head you know? Hopefully, I can find out some good information.

  4. #4

    Default

    I say if anything swap the whole motor and just buy a 95-98 wiring harness for the truck and you'll be good! It would be worth throwing the whipple on that 94 350 motor without some decent mods. My real opinion would be sell the built motor and turbo your 350

    2006 Duramax LBZ
    Edge Evo
    4'' Diamond eye to 6'' tip
    16'' ion alloy, 33'' fierce attitudes
    Lots of work left to do!

  5. #5

    Default

    Would my 94 Tranny work with the 97 Motor if I were to do the swap?

  6. #6

    Default

    Yes I believe it should bolt right up. You should have the 40L60e which is a good tranny and built can handle lots of power but in stock condition I don't know long it'll hold up to that built motor.

    2006 Duramax LBZ
    Edge Evo
    4'' Diamond eye to 6'' tip
    16'' ion alloy, 33'' fierce attitudes
    Lots of work left to do!

  7. #7

    Default

    Welcome to the club. Your looking at alot of work to swap engines. I would just finish the Tahoe project. Sounds like it just needs a properly built transmission.
    :cool:

    2005 Chevy Silverado Z71 Crew Cab
    6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
    17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
    4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
    Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
    B&M aluminum deep transmission pan
    Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
    Weather Tech floor mats
    Cover-Craft seat covers
    Dash mat cover
    Formula One window tint
    One black Lab in rear seat.
    :glasses:

  8. #8

    Default

    Being me, im assuming the vortec is a V8. and i also assume your running the stock chevy 350. i would part it out. take some of the high end vortec bolt ons and bolt it on to the 350. but their 2 different engines in 2 different era's. if you have money i would engine swap and restore the stock 350 with a few bolt on's and paint and sell it. thats just me
    1994 Silverado Z71 1500 4x4
    BF Goodrich 31in All-Terrain Tires
    Painted frame-arms-axle
    Blazer Fog lights
    Removed front splash guard
    Tow hook Chains
    Locking gas cap
    REFLEXXION Rear bumper (Painted black)
    Diamond metal bed caps & Truck Box
    Painted engine bay
    Vinyl Flooring
    Bed insert
    Blistein Shock absorbers
    BOSS bluetooth LCD Radio
    Platinum trucker CB antenna
    Midland 5001z CB Radio
    XO backup camera
    X-press Remote entry-alarm
    CUSTOM metal gas & brake pedal
    Highland fold-away bed cleats
    Race thermostat

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •