Results 1 to 10 of 16
09-12-2011, 05:46 AM #1
Thinking about getting a Train Air Horn.....
So, This thought hit me one day out of no where. I really want to get a Train Horn for the truck, BUT i dont want something that is going to sound weak. Also, i dont want to spend a ton of money on it either. I've checked a few web sites ex. HornBlasters.com. But maybe someone can help me out and point me in the right direction for something good sounding and reasonably priced...... Any help is appreciated
2010 Chevrolet Silverado
Black Leather Interior
6" Fab Tech Lift Kit
BDS Front Skid Plate
35 inch Nitto Terra Grapplers
Aftermarket Fender Flares
20 Inch Mamba Rims
Big Country Step Rails
Custom Flowmaster Exhaust
Chrome Chevy Stamped Exhaust Tips
TOFF Spray in Bedliner
Billet Front Chevy Bow Tie
1% tint all the way around, 70% on front window
09-12-2011, 06:07 AM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
HornBlasters is a very good site to go with. There are some Cheap horns out there that don't last long Beware...Get a good set spend a little more...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
09-12-2011, 07:33 AM #3
X2. I got about a $300 dollar kit and yet it works very well the horns are to high pitched. I'm still looking for a deeper toned set of horns that aren't super big money.
2006 Duramax LBZ
4'' Diamond eye to 6'' tip
16'' ion alloy, 33'' fierce attitudes
Lots of work left to do!
09-12-2011, 02:58 PM #4X2. I got about a $300 dollar kit and yet it works very well the horns are to high pitched. I'm still looking for a deeper toned set of horns that aren't super big money.
Thank yall for the input
09-12-2011, 03:52 PM #5
where do you plan on hiding the horns, tank and compressor?? I have thought about this mod too, but just did know where all the parts would go.
________2013 4C Rated__________
09-12-2011, 04:11 PM #6where do you plan on hiding the horns, tank and compressor?? I have thought about this mod too, but just did know where all the parts would go.
As far as the horn placement goes, i was thinking somewhere closer to the front. Maybe somewhere around the oil pan, front end differential. But that is going to depend on how long the air lines are when i get the unit.
The only thing that i am not 100 % sure about is running the control switch into the cab. I just really dont want to drill through the cab of the truck. But if i do end of drilling, i will take it to my custom shop and let those guys do it so it gets patches correctly. I dont trust myself that much.
So basically i need a horn unit + a low profile tool box.
09-12-2011, 04:44 PM #7
Wiring the switch up in the truck isn't to hard! There should be a grommet in your firewall to run wires through. I also ran a separate switch for the compressor that way if my tank got a leak and the compressor had to keep running it wouldn't always be on and run my battery down.
I'll check out horn blasters! I'd really like to get my whole setup back going again.
09-12-2011, 06:23 PM #8
how did you find the horns mounted under the tool box? rattle the crap out of everything in the box and bed? I always figured you'd want the horns somewhat facing forward to direct the sound, or is it just so loud it don't matter which way they're pointing the A hole infront of you gets the message?
I've been tinkering with this idea as well. But I don't think I want something like super rediculously loud, I'm thinking along the lines of Semi truck loud, or just alot louder and ALLLLLLOT deeper then the stock horn the NNBS's come with. Any ideas on those?
Last edited by Falcone; 09-12-2011 at 06:32 PM.2010 Sierra Nevada Edition
4.8L Ext. cab - Black Z85 4x4 G80
Shaved a couple badges and 4x4 stickers, DeeZee Red label Low Pro gloss black Brite plate cross box,DeeZee gloss black Brite plate bed rail caps , K&N,more to come.
09-12-2011, 06:30 PM #9
I would say tool box is a good idea, now my buddy's Durango took out his spare tire and put the horns there, I couldnt see them neither could the cops unless you crawled under the truck. But he did say he bought his off of ebay for around 5002002 Chevy Silverado & 1995 Ford Bronco
02 Silverado: 50K miles, 20" Motto Rims, Flowmaster 50 Series
95 Bronco: 160K miles, 4" Superlift, 33/12.5/15 Mickey Thompson
01 Civic: 75K miles, DD
09-12-2011, 06:33 PM #10
Worked out pretty well actually! Made so much easier to mount and dismount. They actually didn't rattle anything at all. 4 bolts in the bottom of tool box and they were very sturdy. Yes I probably would've liked to have the sound facing forwards but to be honest it was so loud and when I used them it didn't really matter where the noise was coming from.
Actually have a story about that. Me and my buddy pull into mcdonalds one night and while at the drive through my buddy keeps honking the trainhorn. Well since the horns were behind me the lady working the drivethrough thought the car behind me was hinking and she got really pissed and was yelling at her! I'm sure that was a pleasent conversation with those two ladies after I pulled away!
By 763chev in forum Chevy Truck AccessoriesReplies: 2Last Post: 05-25-2011, 06:07 AM
By RussellFidel in forum The Coffee Shop ~ Chit ChatReplies: 3Last Post: 03-19-2011, 03:57 AM
By Jcloud in forum GM Electrical TechReplies: 3Last Post: 09-10-2010, 06:45 PM
By lsutoms in forum Chevy Truck AccessoriesReplies: 9Last Post: 04-18-2010, 12:01 AM
By 2008blackWT in forum General ClassifiedsReplies: 7Last Post: 12-28-2009, 02:42 PM