GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default code 85 Restart Programmer problem

    I picked up a Hypertech Max Energy from my lift dealer and I wanted to confirm the settings on it but when I hook it up to the port, I keep getting a code 85 Restart Programmer error. I called Hypertech and left a voicemail but figured I might run into someone that has seen that before. I've removed what I thought were all the radio, onstar, and amp fuses and I still get the message.

    I did manage to get it to show the VIN number once and got to cycle though one of the DTC but I got the error again right after I cleared them. I think the DTC was a U1000. I just replaced my battery so I can't see how voltage could be a problem. I did get a low voltage error on my old battery which prompted me to buy a second battery.

    Truck is a 2005 Chevy Silverado 5.3L, Volant intake, Magnaflow Exhaust, Superlift FIT lift

  2. #2

    Default

    It was the cig lighter fuse that was causing my problem... I had the device powered with a laptop since it wasn't coming on with only being plugged into the truck. I don't have a manual for my programmer so I wasn't sure how it was supposed to work. I found the manual and found all the answers.

Similar Threads

  1. Replies: 7
    Last: 09-27-2010, 05:31 PM
  2. Code P0463 (gas level problem)
    By mayo in forum Performance & Fuel
    Replies: 2
    Last: 12-06-2009, 09:03 PM
  3. po332 code knock sensor moister problem help!!
    By burb4us in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 08-19-2009, 10:41 PM
  4. troble code problem
    By pat08silverado in forum GM Powertrain
    Replies: 2
    Last: 03-25-2009, 07:46 PM
  5. Engine Code P1345 & tranny problem
    By smasie13 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last: 05-01-2007, 05:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •