Results 1 to 2 of 2
Thread: Trailer wiring harness question.
09-22-2011, 07:32 PM #1
- Join Date
- Sep 2011
Trailer wiring harness question.
Hello first post. I have my trailer hitch installed on my 02 silverado 1500 & was getting ready to get the trailer wiring setup for trailer lights & noticed that the wire that was tucked under the spare tire had no connectors, just six or so wires w/ the ends taped up. I went to Northern Tool and spoke to one of the "techs" and he said that since there is no plug to connect the wire harness that I would have to get the wiring from the Chevy dealer or just pay a professional to install the trailer wiring. Has anyone else ran across this?
Any help is appreciated!
Last edited by robytar; 09-22-2011 at 07:36 PM.
09-22-2011, 09:00 PM #2
Sorry I do not have a wireing diagram for your truck, perhaps someone with a shop manual may be able to identify those wires for you. If you are sure these are for the trailer then you can get a meter or tester and ring them out and identify thier function. You should have a ground/bat.negative, battery positive, tail light, stop/turn right, stop/turn left, brake, and reverse light and they may not all be in one cable.2000 GMC YUKON SLT, 5.3L tow pkg, G80 rear/w 3.73 gear
By Huntr in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 7Last Post: 04-18-2012, 09:04 AM
By bob s in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 01-03-2011, 03:52 PM
By BigRed07 in forum Audio, Video & Gadget TechReplies: 1Last Post: 06-24-2010, 11:27 AM
By Bleaktrotter in forum Audio, Video & Gadget TechReplies: 0Last Post: 11-10-2008, 12:40 AM
By Lance915 in forum Audio, Video & Gadget TechReplies: 0Last Post: 03-26-2008, 03:04 PM