Results 1 to 4 of 4
Thread: Headlight wiring using 1 relay
10-06-2011, 04:49 PM #1
Headlight wiring using 1 relay
I have a nifty wiring quandry I'm trying to solve for my friend's Dodge pickup. The short story is that large chunks of his factory wiring harness are crispified. Part of the wiring that's toast is the headlight circuit. So, he asked me to wire up a new setup. In the rain one day since he HAD to have the truck running, I wired up a circuit using what I had which was a SPDT switch, of insufficient rating. He used it like that for a long time before the switch wore out. Now he wants me to do it again, but this time, I have time and am going to do it right using relays.
Trick is, I can't think of a wiring setup that doesn't involve 2 relays. Putting in 2 relays wouldn't be the end of the world, but it just seems so logical in my mind that I can do it with 1 relay. The only 1-relay circuit I've been able to come up with involves once again pulling the power for both lights through the switch which is not acceptable.
So, anyone have a solution?Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 199K miles
2005 Saturn ION-2 Stock 255K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
10-11-2011, 03:07 PM #2
Wow, noone even wants to comment on this? This must be a very interesting puzzle. I can whip up a 2-relay circuit that will allow the low beams to stay on with the high beams, so that might be the way I take.
10-11-2011, 08:35 PM #3
So your wanting to wire the headlights and parking lights with one relay vs a separate relay for each?
10-11-2011, 09:28 PM #4
No, the goal was to wire up both high and low beams using one relay to power and switch between them. Switching between them is no problem, as it's a simple 87/87a setup, but figuring out how to also turn them off and power them directly off the battery with that same relay is what I can't figure out. I dont' think it's possible, but I thought I'd throw the challenge out.
By ntbush83 in forum GM Electrical TechReplies: 4Last Post: 12-24-2010, 10:56 PM
By bjerkewm in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 11-11-2009, 09:23 AM
By suicide_star in forum Audio, Video & Gadget TechReplies: 1Last Post: 07-09-2009, 11:00 PM
By Country Cadillac in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 03-24-2009, 11:50 AM
By tfidler in forum GM PowertrainReplies: 3Last Post: 10-30-2007, 07:45 AM